M10 Hex Cap Nut, 304 Stainless Steel - XCNA2M10
The price shown is for the pack.
Available
The Hex Cap Nut A2 (304) is a hex nut with a closed, domed top that covers the end of the bolt thread.
The range runs to 6 variants, covering sizes M4 to M12. Variants are supplied in packs of 50 to 200, depending on size.
A2 (304) stainless steel is the common general-purpose austenitic grade. It resists corrosion well indoors, in fresh water and in most general outdoor conditions, but it is not recommended where chlorides are present, such as coastal, pool and marine settings. Choose A4 (316) there. Metric sizes are written M followed by the nominal thread diameter in millimetres, so M10 is a 10 mm thread.
Austenitic stainless steel is generally non-magnetic, although cold-worked parts can show weak magnetism. Stainless threads can gall (seize) when tightened under load or at speed. A smear of anti-seize on the thread and a steady tightening speed reduce the risk.
Where this product is used
- Larger sizes for frames, plant and structural fixings
- Indoor architectural and joinery work
- Small sizes for enclosures, instruments and light fittings
- Handrails, fittings and exposed fixtures
- Fresh water and general outdoor fittings
- Protecting people and equipment from sharp thread ends
Features
- Choice of 6 sizes, M4 to M12
- Pack quantities to suit trade and bulk buying: packs of 50 to 200
- A2 (304) stainless steel for indoor, fresh water and general outdoor use
- Hex form for spanner or socket tightening
- Closed top covers the bolt end
- Metric thread sizes match the nuts, bolts and tapped holes in most Australian-supplied equipment
Key specifications
| Specification | Detail |
|---|---|
| Product | Hex Cap Nut |
| Type | Hex nut with a closed, domed top that covers the end of the bolt thread |
| Material | A2 (304) stainless steel |
| Typical environment | Indoor, fresh water and general outdoor use |
| Fitting tip | Use anti-seize on the thread to reduce galling |
| Head type | Hex (domed top) |
| Thread system | Metric |
| Number of variants | 6 |
| Key features | Closed top covers the bolt end; Hex form for spanner or socket tightening |
| Supplied in packs of | 50 to 200, by size |
| Magnetic response | Generally non-magnetic (austenitic); cold-worked parts can show weak magnetism |
| Size range | M4 to M12 |
Selecting the right option
Make sure the bolt length does not bottom out in the cap before the nut is tight. Use anti-seize on the thread.
Resources
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
Hex Cap Nut A2 (304): M10
SKU: A0074333 | Model: XCNA2M10
This is the fastener size M10 option of the Hex Cap Nut A2 (304). Key details for this option: material 304 Stainless Steel, pack quantity Pack of 100.

