Hobson NF10PPM24 M24 Metric Hex Flange Nut (No Serration), Class 10, Plain

There are 3 sizes of the Hobson metric hex flange nut (no serration): M24, M30 and M36; plain finish. A flange nut has a round flange formed on one end, so the nut bears on a wider face than a plain hex nut. This version has no serrations on the flange face.

The supplier names these nuts Class 10. The Hobson guides publish strength tables for bolts, not nuts, so no nut strength figure is published here.

The pitch shown for each size is the coarse pitch from the Hobson thread table (manufacturer-stated).

Pack quantity is shown for each item in the table.

Where this product is used

• Fitting to a bolt or stud where a nut with a built-in flange face is wanted
• Joining parts with a bolt of the same thread, size and pitch

Features

• 3 sizes: M24, M30 and M36
• Metric thread
• Plain finish
• Class 10 as named by the supplier
• Pack quantity shown for each item

Common specifications

Key specifications

Selecting the right option

Choose the thread form first: the nut and its bolt or stud must match in thread form, diameter and pitch. Sizes are the nominal diameter in millimetres; compare the pitch in the table with your bolt. The Hobson spanner chart does not list this nut style, so the across-flats size is not published here.

Related products

Related nuts: Hobson Metric Serrated Hex Flange Nut, Class 8, Hot Dip Galvanised, M8 to M20, Hobson Metric Serrated Hex Flange Nut, Class 8, Zinc Plated, M6 to M16 and Hobson Metric Serrated Hex Flange Nut, Class 8, Zinc Yellow Passivate, M4 to M16.