Hobson TXDTIPHS20025 PH2 Insert Phillips Bit, S2 Alloy Steel, TiN

The Hobson insert Phillips bit has a 1/4" drive and is made from S2 alloy steel with a titanium nitride (TiN) finish. This page lists 2 items: PH2 and PH3. Each item is a box of 25.

The Hobson acronym list describes Ph Dr as Phillips Drive (cross recess) (manufacturer-stated).

PH1, PH2 and PH3 are Phillips size numbers, where a higher number is a larger size.

An insert bit is used in an insert bit holder that takes a 1/4" bit; the holder is sold separately.

The supplier description calls these S2 alloy bits with a titanium nitride (TiN) finish. The store listing also says Impax; the supplier description does not, so Impax is not stated here.

The supplier description gives no hardness, torque or impact rating, so none is published.

Where this product is used

• Driving Phillips (cross recess) screws when fitted in an insert bit holder
• Changing bits quickly while one holder stays in the tool

Features

• 2 items: PH2 and PH3
• 1/4" drive
• S2 alloy steel, titanium nitride (TiN)
• Phillips (cross recess) drive; the Hobson guide describes Ph Dr as Phillips Drive (cross recess) (manufacturer-stated)
• Supplied as a box of 25

Common specifications

Key specifications

Selecting the right option

Match the size code to the recess in your screw first, then check the holder you will use takes a 1/4" bit. See also Hobson Insert Phillips Bit, Impax, 1/4" S2 Alloy Black Steel, PH1 to PH3, Box of 25.

Related products

Related products: Hobson Insert Phillips Bit, Impax, 1/4" S2 Alloy Black Steel, PH1 to PH3, Box of 25, Hobson PH3 x 100mm Power Phillips Bit, TiN, 1/4" Drive, S2 Alloy Steel, Box of 25 and Hobson PH2 Insert Phillips Bit, Standard, 1/4" S2 Alloy Steel, Pack of 25.