Inox MX12-175 Supa Glide with PTFE
Available
Inox MX12 Supa Glide with PTFE, 175g aerosol, part number MX12-175. MX12 is a fast drying, resin bonded polytetrafluoroethylene dry film lubricant for coating timber, metal, plastic, rubber, glass and most other surfaces.
It is designed for low friction, light load repetitive stresses, so that moving parts wear longer and need less maintenance, and for uses where conventional sintered PTFE coatings cannot be considered.
Where this product is used
- Coating timber, metal, plastic, rubber and glass
- Low friction, light load repetitive stresses on moving parts
Features
- Fast drying, resin bonded PTFE dry film
- Thin film that is clean and easy to apply
- Hard, abrasion-resistant surface with good adhesion
- Cures at room temperature
- Inhibits corrosion and does not wash off with water
- Resists contamination from dirt and dust
- Touch dry in approximately 5 minutes, full cure 2 hours or more
Key specifications
| Specification | Detail |
|---|---|
| Brand | Inox |
| Product | PTFE dry film lubricant |
| Size | 175g |
| Pack | Aerosol |
| Bonding | Resin bonded |
| Appearance | Visible white or off-white film |
| Cure | Touch dry approx. 5 minutes, full cure 2 hours or more |
| part number | MX12-175 |
Choosing the right option
A single size: 175g aerosol, part number MX12-175.
See also: Inox MX5 Plus PTFE Lubricant, Inox MX9 No Chukka Chain Lube Aerosol 300g, Inox MX3 Lubricant.
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
Inox MX12 Supa Glide With PTFE Aerosol 175g
SKU: A0165742 | Model: MX12-175
Inox A0165742: MX12-175 Supa Glide with PTFE. Pack: Aerosol. Bonding: Resin bonded. Cure: Touch dry approx. 5 minutes.
