KCM 40N ASA Nickel Plated Roller Chain Offset Link (Half Link) Simplex, 1/2 in Pitch

KCM offset links (half links) let a length of ASA nickel plated simplex roller chain be made up with an odd number of pitches. Match the link to the KCM chain with the same chain number, strand count and series.

AIMS Industrial supplies these links individually. This listing covers 4 sizes (40N-80N). All parts plated with KCM Rustop special nickel.

Where this product is used

• Applications that need corrosion resistance and a plated finish
• Light-duty drives in damp or mild corrosive areas
• Replacing steel chain where a plated chain is preferred

Features

• Matched to the KCM chain of the same number and series
• Lets a chain be made up with an odd number of pitches
• All parts plated with KCM Rustop special nickel
• Attractive nickel plated appearance and corrosion resistance
• Maximum allowable load is about 15% lower than standard steel chain

Key specifications

Available sizes

Selecting the right option

For ASA chain the number is the pitch in eighths of an inch: 40 is 4/8 in (1/2 in), 60 is 6/8 in (3/4 in), 100 is 10/8 in (1-1/4 in). The figure after the dash is the number of strands.

Choose nickel plated chain where you want corrosion resistance on a standard steel chain design, and the temperature stays between -10 and +60 degrees C. Size it on the nickel plated allowable load, not the steel figure.

Fitting and use

KCM's power transmission tables note that chain with an offset link transmits 80% of the tabulated power.

KCM says not to replace damaged parts of a chain with new ones. Replace the whole chain, and check the sprockets when changing chain.

Check that a safety cover is fitted before running a chain drive.

Related products

Matching chain: KCM Nickel Plated ASA Roller Chain Simplex 35N-80N, 10 ft Box. Matching connecting links: KCM Nickel Plated ASA Cottered Roller Chain Connecting Link Simplex 80N-200N and KCM Nickel Plated ASA Roller Chain Connecting Link Simplex 35N-200N.