KCM C2050N ASA Double Pitch Nickel Plated Roller Chain Connecting Link, 1-1/4 in Pitch

KCM connecting links join the ends of a length of ASA double pitch nickel plated roller chain into a continuous loop. Match the link to the KCM chain with the same chain number, strand count and series.

AIMS Industrial supplies these links individually. This listing covers 3 sizes (C2050N, C2060HN and C2080HN). All parts plated with KCM Rustop special nickel.

Where this product is used

• Applications that need corrosion resistance and a plated finish
• Light-duty drives in damp or mild corrosive areas
• Replacing steel chain where a plated chain is preferred

Features

• Matched to the KCM chain of the same number and series
• Joins the chain ends into a continuous loop
• All parts plated with KCM Rustop special nickel
• Attractive nickel plated appearance and corrosion resistance
• Maximum allowable load is about 15% lower than standard steel chain

Key specifications

Available sizes

Selecting the right option

Double pitch chain has twice the pitch of the matching standard chain. KCM lists S-type (chain number ends in 0) and R-type (ends in 2) rollers, and R-type chain uses the oversize carrier roller.

Choose nickel plated chain where you want corrosion resistance on a standard steel chain design, and the temperature stays between -10 and +60 degrees C. Size it on the nickel plated allowable load, not the steel figure.

Fitting and use

KCM says not to replace damaged parts of a chain with new ones. Replace the whole chain, and check the sprockets when changing chain.

Check that a safety cover is fitted before running a chain drive.

Related products

Matching chain: KCM Nickel Plated ASA Double Pitch Roller Chain C2050N-C2080HN, 10 ft Box. Matching offset links: KCM Nickel Plated ASA Double Pitch Roller Chain Offset Link (Half Link) C2060HN, 1-1/2 in Pitch.