Hobson ULENC5YD5M08 M8 Lifting Eye Nut, Zinc Yellow Passivate

This page lists 6 sizes of the Hobson lifting eye nut: M8 to M24; zinc yellow passivate finish. A lifting eye nut has an internal thread and a ring (the eye) for attaching lifting gear. No working load limit is published here: confirm the rated load with Hobson before any lift.

Hobson's acronym list defines ZY as zinc plating with a yellow chromate topcoat (manufacturer-stated).

The pitch shown for each size is the coarse pitch from the Hobson thread table (manufacturer-stated).

The supplier description names DIN 582 for these items (manufacturer-stated).

Pack quantity is shown for each item in the table.

Where this product is used

• Fitting a lifting point to a threaded stud or bolt of the same thread and size
• Check the rated load with Hobson before any lift; no load rating is published here

Features

• 6 sizes: M8 to M24
• Metric thread
• Zinc yellow passivate finish
• Pack quantity shown for each item
• DIN 582 named by Hobson for these items (manufacturer-stated)

Common specifications

Key specifications

Selecting the right option

Choose the thread form first: the nut and its bolt or stud must match in thread form, diameter and pitch. Sizes are the nominal diameter in millimetres; compare the pitch in the table with your bolt. Lifting is a safety matter: this page publishes no rated load, so confirm the working load with Hobson first. The Hobson spanner chart does not list this nut style, so the across-flats size is not published here.

Related products

Related nuts: Hobson UNC Wing Nut, Natural Nylon, 1/4" to 1/2", Hobson Metric Wing Nut, Natural Nylon, M4 to M10 and Hobson Metric Fine Track Square Nut, Grade 8, Plain, M14 to M20.