M24 x 170mm Hex Set Screw Class 8.8 Hot Dip Galvanised - Pack of 4

The Hobson metric hex set screw has a hex head and a metric thread, and is fitted into a tapped hole or through a clearance hole with a nut (Class 8.8, hot dip galvanised). This page lists one item: M24 x 170mm, Pack of 4.

Hobson lists class 8.8 as high tensile, and its class and grade chart pairs class 8.8 with imperial grade 5 (manufacturer-stated).

For the item with no supplier line the supplier gives no description line, so only the size and the product name are published: the pack quantity comes from the product title.

Where this product is used

• Fitted into a tapped hole, or through a clearance hole with a nut and washer, to clamp parts together
• Replacing a hex head screw of the same thread form, diameter, pitch and length
• Machinery, equipment and fabrication work where a hex head screw is called for

Features

• 1 item: M24 x 170mm
• Class 8.8, hot dip galvanised
• Length 170mm

Key specifications

Selecting the right option

Choose the thread form first: the screw and the nut or tapped hole must match in thread form, diameter and pitch. Metric sizes are the nominal diameter in millimetres; check the pitch against your nut or tapped hole. Length is measured from under the head to the end of the screw. Check the across-flats size of the head before choosing a spanner; no spanner size is published for these items. For a different strength level see Hobson Metric Hex Set Screw, Class 4.6 UTS, Plain, M16, M20 and M24.

Related products

Related items: Hobson Metric Hex Set Screw, Class 4.6 UTS, Hot Dip Galvanised, M6 to M24, Hobson Metric Hex Set Screw, Class 4.6 UTS, Plain, M16, M20 and M24 and Hobson Metric Hex Set Screw, Class 4.6 UTS, Zinc Plated, M5 to M20.