Maxbor TCHSS7275 72 x 75mm Annular Cutter TCT

The Maxbor tungsten carbide tipped (TCT) annular cutter has a 75mm depth of cut and a 31.75mm shank, and is listed in diameters from 72mm to 100mm (manufacturer-stated). The EJPIN192 ejection pilot pin is the pin the catalogue lists for the whole range.

Every size on this page has the same 75mm depth of cut (DoC) and the same 31.75mm shank, so the diameter is what separates the variants: 72, 75, 78, 80, 82, 85, 88, 92, 95, 98 and 100mm.

Check that your machine and arbor take a 31.75mm shank before you order: the Maxbor 1-1/4" cutter arbor adapter is a 31.75mm Weldon fitting.

Where this product is used

• Cutting large diameter holes, 72mm to 100mm, in thick metal
• Holes up to 75mm deep with an annular cutter
• Drilling with an annular cutter in a magnetic drill

Features

• Tungsten carbide tipped (manufacturer-stated)
• 75mm depth of cut (manufacturer-stated)
• 31.75mm shank (manufacturer-stated)
• EJPIN192 pilot pin listed for all sizes (manufacturer-stated)
• Diameters from 72mm to 100mm (manufacturer-stated)

Common specifications

Key specifications

Figures are from the catalogue entry for these codes (manufacturer-stated).

Selecting the right option

Choose the diameter you need to cut, then add the EJPIN192 ejection pilot pin, which is the pin the catalogue lists for all of these cutters. For smaller diameters see the Maxbor long HSS annular cutters (25mm and 43mm, 110mm depth of cut).

Related products

See also the EJPIN192 ejection pilot pin and the Maxbor 1-1/4" cutter arbor adapter.