M4 Medium Link Chain, 316 Stainless Steel - CMLA4M4

The Medium Link Chain, 316 Stainless Steel is a chain made from medium-length welded links.

You can choose from 6 variants, covering sizes M4 to M12.

The A4 (316) grade is stainless steel with added molybdenum, which helps it hold up where salt, pool chemicals or washdown chemicals are present. It is the more corrosion-resistant of the two common stainless grades, at a higher cost than 304.

Use stainless washers and nuts with stainless fasteners, so the whole joint is made of the same material.

Where this product is used

• Light fencing, barriers and hanging fittings
• Coastal and marine installations
• Decorative and architectural chain
• Washdown and wet-area use
• Outdoor fittings exposed to salt air

Features

• Range covers M4 to M12 in 6 variants
• Medium-length welded links
• Supplied cut or by coil length as shown
• A4 (316) stainless steel with molybdenum, for coastal and chloride-exposed settings

Key specifications

Selecting the right option

The supplier does not state a working load limit for this chain, so it is not suited to lifting. For lifting use rated and marked chain with a working load limit (WLL).

Important

This product is not stated as lifting rated in the supplier data. Do not use it to lift or suspend people or loads unless it is marked with a working load limit (WLL). Rigging and lifting hardware should be selected, inspected and used in line with your site procedures and the relevant Australian Standards, and a qualified rigger should be consulted for any lift.