Bremick NN06ZCM03 M3 Nylon Insert Lock Nut, Grade 6, Zinc

A nylon insert lock nut is a hex nut with a nylon ring fitted in one end. The bolt or stud threads through the ring, which is the locking feature of the nut. This page lists 3 Bremick metric nylon insert lock nut items (metric thread, Grade 6, zinc finish): M3, M4 and M8.

Pitch is the coarse pitch for each diameter, from the maker's thread table (manufacturer-stated). The product data does not state a pitch for these nuts, so check the pitch of your bolt.

The grade is shown as it appears in the product data.

The maker's strength tables cover bolts and screws, not nuts, so no strength figure is published for these nuts.

These items are not in the published stock list, so no standard, spanner size or pack weight is published for them.

Items shown as Each are single pieces; the others are supplied in the pack or box quantity shown in the table.

Where this product is used

• Fastening onto a bolt or stud where a nut with a nylon locking ring is wanted
• Holding parts together in a bolted joint, with a washer under the nut where one is needed

Features

• 3 items: M3, M4 and M8
• Metric thread, nylon insert lock nut
• Grade 6, zinc finish
• Pack quantity shown for each item

Common specifications

Thread and spanner data by size (manufacturer-stated)

Key specifications

Selecting the right option

Match the nut to the bolt, stud or rod: thread form, diameter and pitch must all agree. Sizes are the nominal thread diameter in millimetres; compare the pitch with your bolt. Check the product data or maker if your application has a temperature or chemical limit, because this page gives no limits for the nylon ring. If the joint is load-critical, confirm the nut and bolt pairing with your specification.

Related products

Related nuts: Bremick BSW Nylon Insert Lock Nut, Zinc, 1/2", Pack of 200, Bremick UNC Nylon Insert Lock Nut, Grade 5, Zinc, 10-24 to 1" and Bremick UNF Nylon Insert Lock Nut, Grade 5, Zinc, 1/4" to 7/8".