INOX 316 mini eye bolts, 10

INOX Mini Eye Bolt - 316 Stainless Steel is a lifting eye bolt. Made in 316 (A4) stainless steel, the Mini Eye Bolt is a small threaded eye bolt with a closed eye.

The range runs to 2 variants, covering lengths 10mm to 25mm. Every size comes in packs of 10. Made from 316 (A4) stainless steel, the grade normally specified for chloride-exposed work such as coastal installations, swimming pools, marine fittings and food-processing plant. Use stainless washers and nuts with stainless fasteners, so the whole joint is made of the same material.

Where this product is used

• Coastal and marine installations
• Outdoor fittings exposed to salt air
• Light fixings that need an eye
• Tie-off and hanging points on equipment
• Rope, wire and cable attachment points

Features

• A4 (316) stainless steel with molybdenum, for coastal and chloride-exposed settings
• Closed eye for rope, wire or shackles
• Pack quantities to suit trade and bulk buying: packs of 10
• Lengths from 10mm to 25mm
• Threaded shank screws into a tapped hole or takes a nut

Key specifications

Choosing the right option

Choose the size by the thread and length shown on the variant. Eye bolts are rated for a straight pull in line with the shank, and the rating drops sharply for angled loads. For lifting, use a rated lifting product and a qualified rigger.

Do not use it to lift or suspend people or loads unless it is marked with a working load limit (WLL). Rigging and lifting hardware should be selected, inspected and used in line with your site procedures and the relevant Australian Standards, and a qualified rigger should be consulted for any lift.