NACHI 6013-ZZEC3 Shielded Deep Groove Ball Bearing 65x100x18 mm, C3
Available
The NACHI 6013-ZZEC3 is a single row deep groove ball bearing with two metal shields (ZZE). It measures 65 x 100 x 18 mm (bore x outer diameter x width) and carries a basic dynamic load rating of 30,500 N and a basic static load rating of 25,200 N.
Deep groove bearings are the most widely used ball bearing type: they carry radial, axial and combined loads and run at high speed with high running accuracy. This one has a radial internal clearance of C3 (23 to 43 µm radial).
Where this product is used
- Electric motors and generators
- Pumps, fans and blowers
- Gearboxes and industrial transmissions
- Conveyor rollers, idlers and pulleys
- Power tools, appliances and general industrial machinery
Features
- Two metal shields (ZZE/ZZ) form a labyrinth clearance on both sides and retain the factory grease fill
- Low friction torque, excellent high speed capability, good grease retention and dust protection; not suited to water
- C3 radial internal clearance (23 to 43 µm for a 65 mm bore), larger than Normal
- Basic dynamic load rating 30.5 kN, static 25.2 kN, with NACHI boundary dimensions to the ISO/JIS standard plan
Key specifications
| Specification | Detail |
|---|---|
| Model | 6013-ZZEC3 |
| Type | Single row deep groove ball bearing |
| Bore d | 65 mm |
| Outer diameter D | 100 mm |
| Width B | 18 mm |
| Seals / shields | Two metal shields (ZZE) |
| Radial internal clearance | C3 (23 to 43 µm radial) |
| Basic dynamic load rating Cr | 30,500 N |
| Basic static load rating Cor | 25,200 N |
| Limiting speed, grease | 6,700 rpm |
| Mass | 0.438 kg |
| Shaft shoulder diameter da (min) | 71 mm |
| Housing shoulder diameter Da (max) | 94 mm |
| Fillet radius ra (max) | 1 mm |
Selecting the right option
Shielded bearings (ZE one side, ZZE both sides) arrive grease-filled with a labyrinth clearance, so they keep friction low and speed capability high while adding dust protection. Shields are not suited to water. For standard filled grease the recommended temperature range is -25 to 120 °C.
Fitting and use
Check the load and speed against the catalogue figures in the table before ordering, and apply a suitable safety factor. These bearings must always carry a minimum radial load so the balls roll rather than slide, and heavy axial loads should be checked with AIMS before ordering.
Press the ring that is being fitted, not the other ring or the balls: force goes through the side face of the inner ring on a shaft and the outer ring in a housing.
Shielded bearings are built for inner ring rotation, so they are not suited to high speed outer ring rotation. Do not wash or heat shielded bearings before mounting.
Related products
The same NACHI deep groove range is also available with other closures: NACHI open C3 deep groove ball bearings (28 sizes) and NACHI double contact sealed C3 deep groove ball bearings (3 sizes).
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
