NACHI 6200-ZZEC3 Shielded Deep Groove Ball Bearing 10x30x9 mm, C3

This NACHI range covers 48 single row deep groove ball bearings, shielded, all with C3 radial internal clearance, from 10 to 150 mm bore (outer diameters 26 to 240 mm, widths 8 to 50 mm). Select the size from the drop-down: each size has its own bearing number, load ratings and limiting speed in the Model Details. 1 of the 48 sizes (6013-ZENRC3) have a snap ring groove with the snap ring fitted (NR); the others do not.

Deep groove bearings are the most widely used ball bearing type. They carry radial, axial and combined loads, run at high speed with high running accuracy, and need no adjustment.

Where this product is used

• Electric motors and generators
• Pumps, fans and blowers
• Gearboxes and industrial transmissions
• Conveyor rollers, idlers and pulleys
• Power tools, appliances and general industrial machinery

Features

• Two metal shields (ZZE/ZZ) form a labyrinth clearance on both sides and retain the factory grease fill
• Low friction torque, excellent high speed capability, good grease retention and dust protection; not suited to water
• 1 sizes have a snap ring groove with the snap ring fitted (NR), which simplifies housing design and mounting
• C3 radial internal clearance, larger than Normal: 8 to 23 µm on a 10 mm bore up to 46 to 91 µm on a 150 mm bore
• Load ratings, limiting speeds and mass for every size are taken from the manufacturer’s catalogue; boundary dimensions follow the ISO/JIS standard plan

Key specifications

Available sizes

Selecting the right option

Shielded bearings (ZE one side, ZZE both sides) arrive grease-filled with a labyrinth clearance, so they keep friction low and speed capability high while adding dust protection. Shields are not suited to water. For standard filled grease the recommended temperature range is -25 to 120 °C.

Choose C3 where the bearing will run with an interference fit or a temperature difference between the rings, which both take up clearance; keep Normal clearance for light fits and low temperature rise. The Model Details give the exact micrometre range for each size.

Fitting and use

Check the load and speed against the catalogue figures in the table before ordering, and apply a suitable safety factor. These bearings must always carry a minimum radial load so the balls roll rather than slide, and heavy axial loads should be checked with AIMS before ordering.

Press the ring that is being fitted, not the other ring or the balls: force goes through the side face of the inner ring on a shaft and the outer ring in a housing.

Shielded bearings are built for inner ring rotation, so they are not suited to high speed outer ring rotation. Do not wash or heat shielded bearings before mounting.

Related products

The same NACHI deep groove range is also available with other closures: NACHI open C3 deep groove ball bearings (28 sizes) and NACHI double contact sealed C3 deep groove ball bearings (3 sizes).