M1.5 Nickel Plated Copper Hand Swage - NPSM15

The Nickel Plated Copper Hand Swage is available in 7 sizes (M1.5 to M6) and is a nickel-plated copper sleeve that is pressed onto wire rope with a hand swaging tool to form an eye or join two ropes.

You can choose from 7 variants, covering sizes M1.5 to M6. Pack quantities depend on size: packs of 20 to 100.

Where this product is used

• Coastal and architectural fittings
• Balustrade and wire fencing
• Marine rigging, boat and yacht fittings

Features

• Pressed on with a hand swaging tool
• Pack quantities to suit trade and bulk buying: packs of 20 to 100
• Sleeve sizes for a range of wire diameters
• Range covers M1.5 to M6 in 7 variants
• Forms a loop or eye in wire rope

Key specifications

Selecting the right option

Choose the sleeve size and the matching swaging tool for the wire diameter, and swage to the tool maker's instructions.

Important

This product is not stated as lifting rated in the supplier data. Do not use it to lift or suspend people or loads unless it is marked with a working load limit (WLL). Rigging and lifting hardware should be selected, inspected and used in line with your site procedures and the relevant Australian Standards, and a qualified rigger should be consulted for any lift.