Ninja Maxim Cool Gloves, Small (NIMXCLNFTGY000S)

The Ninja Maxim Cool glove has a black NFT (New Foam Technology) coat over the palm and a lightweight, seamless, ventilated liner of nylon and spandex in grey. Ninja's data sheet lists grip in oily, dry and wet conditions, abrasion resistance, and a coat and liner that allow air through to keep the hands cool (manufacturer-stated). The glove is 25 cm long.

Ninja gives EN 388:2016 4131A and EN 407:2004 X1XXXX (manufacturer-stated). The EN 388 result is abrasion 4, blade cut 1, tear 3 and puncture 1, with a cut result of A, so this is a grip glove and not a cut resistant glove. The EN 407 result (manufacturer-stated) is read in the order burning behaviour, contact heat, convective heat, radiant heat, small molten metal splash and large molten metal splash. An X means that test was not done, so the glove has no rating for it. Contact heat level 1 is the lowest level, so this is not a heat resistant glove. Ninja lists applications as construction and mining, goods handling and transport, manufacturing and general assembly, agriculture, automotive and general maintenance (manufacturer-stated). The EN 388:2016 result (manufacturer-stated) is read in the order abrasion, blade cut, tear, puncture and then a cut letter from A to F. A higher number or letter is a higher level, a 0 means level 1 was not reached, and an X means that test was not done. A P at the end means the impact test was passed. Match the glove to your risk assessment, check the fit, and replace gloves that are worn, torn or contaminated. The ratings are test results on the glove material and do not describe every hazard on your site.

This listing carries small to 2X-large in grey. Contact AIMS if you need the hi-vis yellow version. Beaver packs the glove 12 pairs to a pack and 144 pairs to a carton (manufacturer-stated).

Where this product is used

• Construction and mining (manufacturer-stated)
• Goods handling and transport (manufacturer-stated)
• Manufacturing, assembly and general maintenance (manufacturer-stated)
• Automotive and agriculture (manufacturer-stated)

Features

• NFT coat for oily, dry and wet grip (manufacturer-stated)
• Lightweight nylon and spandex liner (manufacturer-stated)
• Seamless, ventilated liner for cooler hands (manufacturer-stated)
• Abrasion resistant (manufacturer-stated)
• EN 388:2016 4131A (manufacturer-stated)

Common specifications

Key specifications

These manufacturer figures are from Ninja's Maxim Cool data sheet (NIMXCLNFT) and Beaver's PPE catalogue Vol 2.

Selecting the right option

Choose the Maxim Cool for general handling in warm conditions. For a moisture wicking liner see the Maxim Evolution glove.

Related products

Other Ninja general purpose gloves: Maxim Evolution glove, DexTec glove, Maxim GripX glove, Multi Lite glove and Multi Flex glove.