Ninja Cut F gloves, Small
Available
The Ninja RAZR Slash-Tec FA6 is a cut resistant glove with an 18 gauge liner of Kevlar, modacrylic and steel, and a black NFT (New Foam Technology) coat on the palm with thumb line dipping. It has reinforcement over the full thumb and forefinger, a colour coded size band, and a coat that gives oil, dry and wet grip and lets air through. The liner is black and red and the glove is 25cm long (size large).
It has EN 388:2016 4X42F, which is abrasion 4, blade cut not tested, tear 4 and puncture 2, with a cut result of F. Ninja also gives EN 407:2004 X1XXXX. The EN 407 result is read in the order burning behaviour, contact heat, convective heat, radiant heat, small molten metal splash and large molten metal splash. An X means that test was not done, so the glove has no rating for it. Contact heat level 1 is the lowest level, so this is not a heat resistant glove.
Where this product is used
- Construction and mining
- Fabrication and sheet metal work
- Glazing and scaffolding
- Machinery, oil and gas, timber and forestry
Features
- Cut result F (EN 388:2016 4X42F)
- 18 gauge Kevlar, modacrylic and steel liner
- Reinforced thumb and forefinger
- NFT palm coat for oily, dry and wet grip
- Colour coded size band
Key specifications
| Specification | Detail |
|---|---|
| Brand | Ninja |
| Length | 25cm (size large) |
| Coating | NFT, palm with thumb line dipping, black |
| Liner | 18 gauge Kevlar, modacrylic and steel, black and red |
| EN 388:2016 | 4X42F: abrasion 4, blade cut not tested, tear 4, puncture 2, cut F |
| EN 407:2004 | X1XXXX: contact heat level 1 only |
| Australian standards | AS/NZS 2161.2:2020 and 2161.3:2020 and 2161.4:1999 |
| Pack | Beaver: 12 pairs per pack, carton of 120 |
| Code | NIRZRSTFOBBC00S, NIRZRSTFOBBD00M, NIRZRSTFOBBE00L, NIRZRSTFOBBR1XL, NIRZRSTFOBBR2XL |
| Size | Small, Medium, Large, X-Large, 2X-Large |
Choosing the right option
Choose the FA6 for work with a higher cut risk. For impact protection on the back of the hand see the Slash-Tec FA6 Impact glove, and for a lower cut result see the Slash-Tec DA4 glove, medium and RAZR NFT CA3 glove.
Other Ninja cut resistant gloves: Slash-Tec FA6 Impact glove, Slash-Tec DA4 glove, medium, RAZR NFT CA3 glove.
| Option | Part number | SKU |
|---|---|---|
| Small | NIRZRSTFOBBC00S | A0192906 |
| Medium | NIRZRSTFOBBD00M | A0192907 |
| Large | NIRZRSTFOBBE00L | A0192908 |
| XL | NIRZRSTFOBBR1XL | A0192909 |
| 2XL | NIRZRSTFOBBR2XL | A0192910 |
Resources
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
Ninja RAZR Slash-Tec FA6 NFT Cut F Gloves, Kevlar Liner, Sizes S to 2XL: Small
SKU: A0192906 | Model: NIRZRSTFOBBC00S
Ninja Slash-Tec FA6 Gloves, small (NIRZRSTFOBBC00S): EN 388:2016 4X42F, Kevlar liner.

