NBR 70 O-Ring Cord ORC-1.5MM, 1.5 mm Diameter, Per Metre

NBR (nitrile rubber) 70 durometer O-ring cord in 34 metric diameters from 1.5 to 16 mm. Sold by the metre and cut to length.

Cut the cord to length and join the ends to make an O-ring for a non-standard groove, or to replace a seal when the standard size is not at hand. Nitrile rubber has good resistance to hydrocarbon fuels, greases and mineral oils.

Where this product is used

• Making custom O-rings for non-standard grooves
• Emergency and workshop seal repairs
• Replacing O-rings in older or unusual equipment
• Prototype and one-off sealing jobs

Features

• Nitrile rubber (NBR), 70 durometer
• 34 metric diameters, 1.5 to 16 mm
• Sold by the metre and cut to length
• Make custom O-rings for non-standard grooves

Key specifications

Sizes available

Selecting and fitting

Choose the cord diameter to match the cross section of the O-ring or the groove. Cut the cord to the length of the groove centreline, allowing for the join, and join the ends with a suitable adhesive.

A joined cord seal is a repair or workshop solution. Where a standard size is available, a ready-made O-ring is listed under NBR 70 O-Ring, Metric, 3 mm Cross Section, 3 to 150 mm ID and NBR 70 O-Ring, Metric, 2 mm Cross Section, 1 to 100 mm ID. Cord is also offered in NBR 70 O-Ring Cord, Imperial, 1/16 to 1/2 in Diameter.

Check that the fluid and the operating conditions suit nitrile before fitting. The catalogue does not list a temperature range for this cord, so contact AIMS if temperature is critical.

Dimensions are as listed in the manufacturer catalogue and are for reference. Contact AIMS to confirm a measurement if it is critical to your application.