(02) 9773-0122
sales@aimsindustrial.com.au
📄 0
Oil Seal Metric - Width 10mm
Oil Seal Metric - Width 10mm

Seagull Double Lip Oil Seal 30 x 56 x 10mm (30X56X10TC)

$8.00
$8.00
Inc. GST

Available

Seagull metric double lip oil seals, 10 mm wide, in 148 sizes. Shaft diameters run from 30 to 85 mm and housing bores from 50 to 140 mm, and each size is a rotary shaft seal in Nitrile Rubber (NBR).

Each size carries a model code in the form shaft x housing bore x width followed by the type, for example 55X95X10TC: 55 mm shaft, 95 mm housing bore, 10 mm wide, type TC.

Where this product is used

  • Gearboxes, speed reducers and differentials, sealing input and output shafts
  • Electric motors, pumps, compressors and fans where a rotating shaft leaves a housing
  • Wheel hubs, axles and drive shafts on vehicles, trailers and agricultural machinery
  • Hydraulic pumps and motors, conveyor and idler drives, and general workshop repairs

Features

  • Double lip (TC): a second lip on the outer side helps keep dust and dirt away from the main sealing lip
  • Nitrile rubber (NBR) lip that suits mineral oils and greases in general machinery
  • Every size has a model code that spells out the shaft, bore and width, so it can be matched to the marking on the old seal
  • Seagull seals from AIMS Industrial, Sydney, with Australia-wide delivery

Key specifications

Specification Detail
Brand Seagull
Product type Rotary shaft oil seal
Lip type Double Lip (TC)
Material Nitrile Rubber (NBR)
Measurement system Metric (mm)
Shaft diameter 30 to 85 mm
Housing bore 50 to 140 mm
Width 10 mm
Sizes in this listing 148
Model code Shaft x housing bore x width, then type (e.g. 55X95X10TC)

Available sizes

Show all 148 sizes
Size (shaft x bore x width) Model code Type SKU
30 x 56 x 10 mm 30X56X10TC Double Lip A0125083
30 x 58 x 10 mm 30X58X10TC Double Lip A0125084
32 x 56 x 10 mm 32X56X10TC Double Lip A0125102
32 x 65 x 10 mm 32X65X10TC Double Lip A0125106
32 x 78 x 10 mm 32X78X10TC Double Lip A0125107
33 x 52 x 10 mm 33X52X10TC Double Lip A0125110
33 x 55 x 10 mm 33X55X10TC Double Lip A0125111
33 x 56 x 10 mm 33X56X10TC Double Lip A0125112
34 x 55 x 10 mm 34X55X10TC Double Lip A0125119
34 x 58 x 10 mm 34X58X10TC Double Lip A0125120
34 x 62 x 10 mm 34X62X10TC Double Lip A0125121
34 x 72 x 10 mm 34X72X10TC Double Lip A0125122
34 x 75 x 10 mm 34X75X10TC Double Lip A0125123
35 x 57 x 10 mm 35X57X10TC Double Lip A0125134
35 x 58 x 10 mm 35X58X10TC Double Lip A0125135
36 x 58 x 10 mm 36X58X10TC Double Lip A0125150
37 x 50 x 10 mm 37X50X10TC Double Lip A0125154
37 x 62 x 10 mm 37X62X10TC Double Lip A0125158
38 x 56 x 10 mm 38X56X10TC Double Lip A0125163
38 x 62 x 10 mm 38X62X10TC Double Lip A0125166
38 x 65 x 10 mm 38X65X10TC Double Lip A0125167
38 x 68 x 10 mm 38X68X10TC Double Lip A0125168
38 x 70 x 10 mm 38X70X10TC Double Lip A0125169
38 x 72 x 10 mm 38X72X10TC Double Lip A0125170
38 x 74 x 10 mm 38X74X10TC Double Lip A0125171
39 x 65 x 10 mm 39X65X10TC Double Lip A0125176
40 x 80 x 10 mm 40X80X10TC Double Lip A0125191
42 x 67 x 10 mm 42X67X10TC Double Lip A0148349
42 x 68 x 10 mm 42X68X10TC Double Lip A0148350
43 x 60 x 10 mm 43X60X10TC Double Lip A0148355
43 x 64 x 10 mm 43X64X10TC Double Lip A0148356
43 x 66 x 10 mm 43X66X10TC Double Lip A0148357
43 x 69 x 10 mm 43X69X10TC Double Lip A0148358
43 x 73 x 10 mm 43X73X10TC Double Lip A0148359
44 x 58 x 10 mm 44X58X10TC Double Lip A0148360
44 x 72 x 10 mm 44X72X10TC Double Lip A0148365
45 x 67 x 10 mm 45X67X10TC Double Lip A0148372
45 x 70 x 10 mm 45X70X10TC Double Lip A0148374
45 x 75 x 10 mm 45X75X10TC Double Lip A0148376
45 x 80 x 10 mm 45X80X10TC Double Lip A0148377
45 x 85 x 10 mm 45X85X10TC Double Lip A0148378
45 x 100 x 10 mm 45X100X10TC Double Lip A0148366
46 x 72 x 10 mm 46X72X10TC Double Lip A0148381
46 x 78 x 10 mm 46X78X10TC Double Lip A0148382
48 x 74 x 10 mm 48X74X10TC Double Lip A0148392
50 x 69 x 10 mm 50X69X10TC Double Lip A0148402
50 x 74 x 10 mm 50X74X10TC Double Lip A0148405
50 x 75 x 10 mm 50X75X10TC Double Lip A0148406
50 x 78 x 10 mm 50X78X10TC Double Lip A0148407
50 x 80 x 10 mm 50X80X10TC Double Lip A0148408
50 x 85 x 10 mm 50X85X10TC Double Lip A0148410
50 x 90 x 10 mm 50X90X10TC Double Lip A0148411
50 x 110 x 10 mm 50X110X10TC Double Lip A0148397
52 x 72 x 10 mm 52X72X10TC Double Lip A0148416
52 x 75 x 10 mm 52X75X10TC Double Lip A0148417
52 x 80 x 10 mm 52X80X10TC Double Lip A0148418
52 x 85 x 10 mm 52X85X10TC Double Lip A0148419
52 x 90 x 10 mm 52X90X10TC Double Lip A0148420
53 x 68 x 10 mm 53X68X10TC Double Lip A0148421
54 x 68 x 10 mm 54X68X10TC Double Lip A0148422
54 x 70 x 10 mm 54X70X10TC Double Lip A0148423
54 x 72 x 10 mm 54X72X10TC Double Lip A0148424
54 x 81 x 10 mm 54X81X10TC Double Lip A0148426
54 x 82 x 10 mm 54X82X10TC Double Lip A0148427
55 x 67 x 10 mm 55X67X10TC Double Lip A0148430
55 x 68 x 10 mm 55X68X10TC Double Lip A0148431
55 x 70 x 10 mm 55X70X10TC Double Lip A0148432
55 x 72 x 10 mm 55X72X10TC Double Lip A0148433
55 x 75 x 10 mm 55X75X10TC Double Lip A0148434
55 x 78 x 10 mm 55X78X10TC Double Lip A0148435
55 x 80 x 10 mm 55X80X10TC Double Lip A0148436
55 x 82 x 10 mm 55X82X10TC Double Lip A0148437
55 x 85 x 10 mm 55X85X10TC Double Lip A0148438
55 x 90 x 10 mm 55X90X10TC Double Lip A0148439
55 x 95 x 10 mm 55X95X10TC Double Lip A0148440
55 x 100 x 10 mm 55X100X10TC Double Lip A0148428
55 x 120 x 10 mm 55X120X10TC Double Lip A0148429
56 x 78 x 10 mm 56X78X10TC Double Lip A0125196
58 x 74 x 10 mm 58X74X10TC Double Lip A0125201
58 x 75 x 10 mm 58X75X10TC Double Lip A0125202
58 x 85 x 10 mm 58X85X10TC Double Lip A0125204
58 x 90 x 10 mm 58X90X10TC Double Lip A0125205
60 x 70 x 10 mm 60X70X10TC Double Lip A0125210
60 x 72 x 10 mm 60X72X10TC Double Lip A0125211
60 x 74 x 10 mm 60X74X10TC Double Lip A0125212
60 x 78 x 10 mm 60X78X10TC Double Lip A0125214
60 x 80 x 10 mm 60X80X10TC Double Lip A0125215
60 x 82 x 10 mm 60X82X10TC Double Lip A0125216
60 x 90 x 10 mm 60X90X10TC Double Lip A0125218
60 x 95 x 10 mm 60X95X10TC Double Lip A0125219
60 x 100 x 10 mm 60X100X10TC Double Lip A0125206
60 x 105 x 10 mm 60X105X10TC Double Lip A0125207
60 x 110 x 10 mm 60X110X10TC Double Lip A0125208
60 x 130 x 10 mm 60X130X10TC Double Lip A0125209
62 x 80 x 10 mm 62X80X10TC Double Lip A0125221
62 x 82 x 10 mm 62X82X10TC Double Lip A0125222
62 x 85 x 10 mm 62X85X10TC Double Lip A0125223
62 x 90 x 10 mm 62X90X10TC Double Lip A0125224
62 x 95 x 10 mm 62X95X10TC Double Lip A0125225
62 x 100 x 10 mm 62X100X10TC Double Lip A0125220
63 x 85 x 10 mm 63X85X10TC Double Lip A0125227
63 x 90 x 10 mm 63X90X10TC Double Lip A0125228
64 x 85 x 10 mm 64X85X10TC Double Lip A0125230
65 x 80 x 10 mm 65X80X10TC Double Lip A0125237
65 x 82 x 10 mm 65X82X10TC Double Lip A0125238
65 x 85 x 10 mm 65X85X10TC Double Lip A0125239
65 x 90 x 10 mm 65X90X10TC Double Lip A0125241
65 x 92 x 10 mm 65X92X10TC Double Lip A0125242
65 x 95 x 10 mm 65X95X10TC Double Lip A0125243
65 x 100 x 10 mm 65X100X10TC Double Lip A0125231
65 x 105 x 10 mm 65X105X10TC Double Lip A0125232
65 x 110 x 10 mm 65X110X10TC Double Lip A0125233
65 x 120 x 10 mm 65X120X10TC Double Lip A0125235
65 x 140 x 10 mm 65X140X10TC Double Lip A0125236
67 x 85 x 10 mm 67X85X10TC Double Lip A0125244
67 x 89 x 10 mm 67X89X10TC Double Lip A0125245
68 x 85 x 10 mm 68X85X10TC Double Lip A0125247
68 x 90 x 10 mm 68X90X10TC Double Lip A0125249
68 x 100 x 10 mm 68X100X10TC Double Lip A0125246
70 x 85 x 10 mm 70X85X10TC Double Lip A0125257
70 x 87 x 10 mm 70X87X10TC Double Lip A0125258
70 x 88 x 10 mm 70X88X10TC Double Lip A0125259
70 x 90 x 10 mm 70X90X10TC Double Lip A0125260
70 x 92 x 10 mm 70X92X10TC Double Lip A0125261
70 x 95 x 10 mm 70X95X10TC Double Lip A0125262
70 x 100 x 10 mm 70X100X10TC Double Lip A0125250
70 x 105 x 10 mm 70X105X10TC Double Lip A0125251
70 x 110 x 10 mm 70X110X10TC Double Lip A0125252
70 x 112 x 10 mm 70X112X10TC Double Lip A0125253
72 x 90 x 10 mm 72X90X10TC Double Lip A0125266
72 x 95 x 10 mm 72X95X10TC Double Lip A0125267
72 x 100 x 10 mm 72X100X10TC Double Lip A0125263
73 x 100 x 10 mm 73X100X10TC Double Lip A0125268
75 x 90 x 10 mm 75X90X10TC Double Lip A0125276
75 x 95 x 10 mm 75X95X10TC Double Lip A0125277
75 x 100 x 10 mm 75X100X10TC Double Lip A0125269
75 x 105 x 10 mm 75X105X10TC Double Lip A0125270
75 x 110 x 10 mm 75X110X10TC Double Lip A0125271
77 x 93 x 10 mm 77X93X10TC Double Lip A0125279
77 x 95 x 10 mm 77X95X10TC Double Lip A0125280
78 x 100 x 10 mm 78X100X10TC Double Lip A0125281
80 x 100 x 10 mm 80X100X10TC Double Lip A0125282
80 x 105 x 10 mm 80X105X10TC Double Lip A0125283
80 x 110 x 10 mm 80X110X10TC Double Lip A0125284
84 x 100 x 10 mm 84X100X10TC Double Lip A0148503
85 x 100 x 10 mm 85X100X10TC Double Lip A0148504
85 x 105 x 10 mm 85X105X10TC Double Lip A0148505
85 x 110 x 10 mm 85X110X10TC Double Lip A0148506

Model codes are the Seagull size codes; the SKU is the AIMS part number.

Selecting the right option

Choose the size from the options list. The first number is the shaft diameter and the second is the housing bore, both in millimetres. Width is 10 mm for every size on this page.

Match the shaft diameter, the housing bore and the width. Go by the shaft and bore rather than the lip of the old seal, as the lip sits slightly smaller than the shaft it seals on. Width is usually the least critical of the three, provided the housing has the depth.

Type TC is the double lip version, with a second lip on the outer side that helps keep dust and dirt off the main lip; type SC is single lip, suited to cleaner conditions.

NBR suits mineral oils and greases in general machinery. If the seal runs hot or meets aggressive fluids, look at the Viton version of the same size range.

If the size you need is not listed, send AIMS the shaft diameter, housing bore and width and we will check what is available.

Fitting and use

Fit the seal with the main lip facing the fluid you are keeping in, press it in square using a tool that bears on the outer face of the seal, and avoid hammering directly on the seal.

Lubricate the lip with the system oil or grease before assembly, and cover keyways, splines, threads or sharp shoulders with a sleeve or tape so they cannot cut the lip as it passes over.

Run the seal on a clean, smooth shaft with a lead-in chamfer and no burrs. A shaft finished to ISO h11 is the usual guide for rotary shaft seals.

Related products

Other Seagull metric oil seals: Seagull Oil Seal Double Lip Metric - Width 12mm, Seagull Oil Seal Double Lip Metric - Width 8mm, Seagull Oil Seal Double Lip Metric - Width 13mm, Seagull Oil Seal Double Lip Metric - Width 7mm and Seagull Oil Seal Double Lip Metric - Width 15mm. See also the full range in Oil Seals & O-Rings.
Product Highlights −

Seagull Oil Seal Double Lip Metric - Width 10mm: 148 metric double lip oil seal sizes in Nitrile Rubber (NBR), for shaft diameters 30 to 85 mm.

Choose by shaft diameter, housing bore and width, using model codes such as 55X95X10TC. AIMS Industrial supplies Seagull oil seals Australia-wide.

Resources

File icon
Seagull-Oil-Seal-Double-Lip-Metric-Width-10mm-Size-Tables
Payment & Security
  • Apple Pay
  • Google Pay
  • American Express
  • Mastercard
  • Visa
  • PayPal
  • Union Pay

Secure Checkout. We do not store credit card details

Available Options:
  • 30 x 56
    Model Number: 30X56X10TC
  • 30 x 58
    Model Number: 30X58X10TC
  • 32 x 56
    Model Number: 32X56X10TC
  • 32 x 65
    Model Number: 32X65X10TC
  • 32 x 78
    Model Number: 32X78X10TC
  • 33 x 52
    Model Number: 33X52X10TC
  • 33 x 55
    Model Number: 33X55X10TC
  • 33 x 56
    Model Number: 33X56X10TC
  • 34 x 55
    Model Number: 34X55X10TC
  • 34 x 58
    Model Number: 34X58X10TC
  • 34 x 62
    Model Number: 34X62X10TC
  • 34 x 72
    Model Number: 34X72X10TC
  • 34 x 75
    Model Number: 34X75X10TC
  • 35 x 57
    Model Number: 35X57X10TC
  • 35 x 58
    Model Number: 35X58X10TC
  • 36 x 58
    Model Number: 36X58X10TC
  • 37 x 50
    Model Number: 37X50X10TC
  • 37 x 62
    Model Number: 37X62X10TC
  • 38 x 56
    Model Number: 38X56X10TC
  • 38 x 62
    Model Number: 38X62X10TC
  • 38 x 65
    Model Number: 38X65X10TC
  • 38 x 68
    Model Number: 38X68X10TC
  • 38 x 70
    Model Number: 38X70X10TC
  • 38 x 72
    Model Number: 38X72X10TC
  • 38 x 74
    Model Number: 38X74X10TC
  • 39 x 65
    Model Number: 39X65X10TC
  • 40 x 80
    Model Number: 40X80X10TC
  • 42 x 67
    Model Number: 42X67X10TC
  • 42 x 68
    Model Number: 42X68X10TC
  • 43 x 60
    Model Number: 43X60X10TC
  • 43 x 64
    Model Number: 43X64X10TC
  • 43 x 66
    Model Number: 43X66X10TC
  • 43 x 69
    Model Number: 43X69X10TC
  • 43 x 73
    Model Number: 43X73X10TC
  • 44 x 58
    Model Number: 44X58X10TC
  • 44 x 72
    Model Number: 44X72X10TC
  • 45 x 100
    Model Number: 45X100X10TC
  • 45 x 67
    Model Number: 45X67X10TC
  • 45 x 70
    Model Number: 45X70X10TC
  • 45 x 75
    Model Number: 45X75X10TC
  • 45 x 80
    Model Number: 45X80X10TC
  • 45 x 85
    Model Number: 45X85X10TC
  • 46 x 72
    Model Number: 46X72X10TC
  • 46 x 78
    Model Number: 46X78X10TC
  • 48 x 74
    Model Number: 48X74X10TC
  • 50 x 110
    Model Number: 50X110X10TC
  • 50 x 69
    Model Number: 50X69X10TC
  • 50 x 74
    Model Number: 50X74X10TC
  • 50 x 75
    Model Number: 50X75X10TC
  • 50 x 78
    Model Number: 50X78X10TC
  • 50 x 80
    Model Number: 50X80X10TC
  • 50 x 85
    Model Number: 50X85X10TC
  • 50 x 90
    Model Number: 50X90X10TC
  • 52 x 72
    Model Number: 52X72X10TC
  • 52 x 75
    Model Number: 52X75X10TC
  • 52 x 80
    Model Number: 52X80X10TC
  • 52 x 85
    Model Number: 52X85X10TC
  • 52 x 90
    Model Number: 52X90X10TC
  • 53 x 68
    Model Number: 53X68X10TC
  • 54 x 68
    Model Number: 54X68X10TC
  • 54 x 70
    Model Number: 54X70X10TC
  • 54 x 72
    Model Number: 54X72X10TC
  • 54 x 81
    Model Number: 54X81X10TC
  • 54 x 82
    Model Number: 54X82X10TC
  • 55 x 100
    Model Number: 55X100X10TC
  • 55 x 120
    Model Number: 55X120X10TC
  • 55 x 67
    Model Number: 55X67X10TC
  • 55 x 68
    Model Number: 55X68X10TC
  • 55 x 70
    Model Number: 55X70X10TC
  • 55 x 72
    Model Number: 55X72X10TC
  • 55 x 75
    Model Number: 55X75X10TC
  • 55 x 78
    Model Number: 55X78X10TC
  • 55 x 80
    Model Number: 55X80X10TC
  • 55 x 82
    Model Number: 55X82X10TC
  • 55 x 85
    Model Number: 55X85X10TC
  • 55 x 90
    Model Number: 55X90X10TC
  • 55 x 95
    Model Number: 55X95X10TC
  • 56 x 78
    Model Number: 56X78X10TC
  • 58 x 74
    Model Number: 58X74X10TC
  • 58 x 75
    Model Number: 58X75X10TC
  • 58 x 85
    Model Number: 58X85X10TC
  • 58 x 90
    Model Number: 58X90X10TC
  • 60 x 100
    Model Number: 60X100X10TC
  • 60 x 105
    Model Number: 60X105X10TC
  • 60 x 110
    Model Number: 60X110X10TC
  • 60 x 130
    Model Number: 60X130X10TC
  • 60 x 70
    Model Number: 60X70X10TC
  • 60 x 72
    Model Number: 60X72X10TC
  • 60 x 74
    Model Number: 60X74X10TC
  • 60 x 78
    Model Number: 60X78X10TC
  • 60 x 80
    Model Number: 60X80X10TC
  • 60 x 82
    Model Number: 60X82X10TC
  • 60 x 90
    Model Number: 60X90X10TC
  • 60 x 95
    Model Number: 60X95X10TC
  • 62 x 100
    Model Number: 62X100X10TC
  • 62 x 80
    Model Number: 62X80X10TC
  • 62 x 82
    Model Number: 62X82X10TC
  • 62 x 85
    Model Number: 62X85X10TC
  • 62 x 90
    Model Number: 62X90X10TC
  • 62 x 95
    Model Number: 62X95X10TC
  • 63 x 85
    Model Number: 63X85X10TC
  • 63 x 90
    Model Number: 63X90X10TC
  • 64 x 85
    Model Number: 64X85X10TC
  • 65 x 100
    Model Number: 65X100X10TC
  • 65 x 105
    Model Number: 65X105X10TC
  • 65 x 110
    Model Number: 65X110X10TC
  • 65 x 120
    Model Number: 65X120X10TC
  • 65 x 140
    Model Number: 65X140X10TC
  • 65 x 80
    Model Number: 65X80X10TC
  • 65 x 82
    Model Number: 65X82X10TC
  • 65 x 85
    Model Number: 65X85X10TC
  • 65 x 90
    Model Number: 65X90X10TC
  • 65 x 92
    Model Number: 65X92X10TC
  • 65 x 95
    Model Number: 65X95X10TC
  • 67 x 85
    Model Number: 67X85X10TC
  • 67 x 89
    Model Number: 67X89X10TC
  • 68 x 100
    Model Number: 68X100X10TC
  • 68 x 85
    Model Number: 68X85X10TC
  • 68 x 90
    Model Number: 68X90X10TC
  • 70 x 100
    Model Number: 70X100X10TC
  • 70 x 105
    Model Number: 70X105X10TC
  • 70 x 110
    Model Number: 70X110X10TC
  • 70 x 112
    Model Number: 70X112X10TC
  • 70 x 85
    Model Number: 70X85X10TC
  • 70 x 87
    Model Number: 70X87X10TC
  • 70 x 88
    Model Number: 70X88X10TC
  • 70 x 90
    Model Number: 70X90X10TC
  • 70 x 92
    Model Number: 70X92X10TC
  • 70 x 95
    Model Number: 70X95X10TC
  • 72 x 100
    Model Number: 72X100X10TC
  • 72 x 90
    Model Number: 72X90X10TC
  • 72 x 95
    Model Number: 72X95X10TC
  • 73 x 100
    Model Number: 73X100X10TC
  • 75 x 100
    Model Number: 75X100X10TC
  • 75 x 105
    Model Number: 75X105X10TC
  • 75 x 110
    Model Number: 75X110X10TC
  • 75 x 90
    Model Number: 75X90X10TC
  • 75 x 95
    Model Number: 75X95X10TC
  • 77 x 93
    Model Number: 77X93X10TC
  • 77 x 95
    Model Number: 77X95X10TC
  • 78 x 100
    Model Number: 78X100X10TC
  • 80 x 100
    Model Number: 80X100X10TC
  • 80 x 105
    Model Number: 80X105X10TC
  • 80 x 110
    Model Number: 80X110X10TC
  • 84 x 100
    Model Number: 84X100X10TC
  • 85 x 100
    Model Number: 85X100X10TC
  • 85 x 105
    Model Number: 85X105X10TC
  • 85 x 110
    Model Number: 85X110X10TC

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
Aims white logo

Industrial Supplies Made Simple!

About AIMS

Shop

Contact Details

Milperra NSW 2214, Australia
+61297730122
8:00am - 5:00pm, Mon to Fri

© 2026 AIMS Industrial Supplies.

Home Cart Products
Quote Cart
+ Add more products Submit Quote Request