Pferd 22000009 Alumaster High Speed Disc HSD-F 115/125, 115 mm, 22.23 mm Bore

The Pferd Alumaster HSD-F 115/125 (item 22000009) is a high speed disc with replaceable tungsten carbide cutting inserts, made for flat surface work with an angle grinder.

The catalogue calls it a high-performance tool for surface work with an angle grinder, with specially developed, turnable and replaceable tungsten carbide cutting inserts giving a high stock removal rate on aluminium alloys (manufacturer-stated).

Type HSD-F 115/125 was developed specifically for angle grinders with a diameter of 115/125 mm and for flat working (manufacturer-stated).

The catalogue says an extraction system is not required as no hazardous or explosive dust is generated, and lists the compressed-air angle grinder PWT 26/120 HV M14 and the electric angle grinder UWER 18/110 SI as suitable drives (manufacturer-stated).

Where this product is used

• Surface work on aluminium alloys using an angle grinder (manufacturer-stated)
• Milling out, work on weld seams and fillet welds, and work on edges/chamfering (manufacturer-stated)

Features

• Turnable, replaceable tungsten carbide cutting inserts, pre-mounted (manufacturer-stated)
• Robust cut geometry (manufacturer-stated)
• Supplied with a hexalobular socket wrench and a plastic box (manufacturer-stated)
• Maximum speed 13,300 rpm (manufacturer-stated)

Key specifications

Selecting the right option

The catalogue gives a maximum speed of 13,300 rpm for this disc, so keep the grinder at or below it (manufacturer-stated). The HSD-F is the flat-working type; for peripheral milling and milling out root seams, see the HSD-R 115/125. Spare inserts are the WSP-A-12R insert set and a service kit with two inserts, two screws and a wrench is the ASS-R12 service kit.

Related products

Related: WSP-A-12R spare inserts, ASS-R12 service kit and Alumaster HSD-R 115/125 disc.