Pferd WRC burr, 12 x 25mm

The Pferd WRC Cylindrical Radius End Burr is a tungsten carbide burr in NON-FERROUS cut with a 6mm shank. The range has 2 options, with head sizes of 6 x 16 and 12 x 25mm (diameter x cut length) and total lengths of 55 to 65mm.

The WRC is a cylindrical burr with radius end to DIN 8032 for general-purpose use on non-ferrous metals and fibre-reinforced plastics. The NON-FERROUS cut gives a high stock removal rate on non-ferrous metals, brass, copper, plastics and fibre-reinforced plastics and is suitable for universal use. Key features: very good stock removal rate on brass and copper, plastics and fibre-reinforced plastics.

Where this product is used

• Non-ferrous metals such as brass and copper
• Plastics and fibre-reinforced plastics

Features

• NON-FERROUS Cut: high stock removal rate on non-ferrous metals, brass, copper and plastics
• Cylindrical head with a radius end, 6mm shank
• Head sizes 6 x 16 and 12 x 25mm, total length 55 to 65mm
• Very good stock removal rate on brass and copper, plastics and fibre-reinforced plastics

Key specifications

Choosing the right option

Check that your tool holds a 6mm shank. It has the ALU cut for aluminium and the INOX cut for stainless steel (INOX). Do not exceed the maximum permitted rotational speed, wear eye protection, hearing protection and a dust mask, and do not use a damaged burr.

Same cut in other shapes: Pferd ZYA Cylindrical Burr, NON-FERROUS Cut, 6mm Shank, 12 x 25mm (21101996).

Same shape in other cuts: Pferd WRC Cylindrical Radius End Burr, Cut 3 PLUS, 6mm Shank, 6 x 16 to 16 x 25mm, Pferd WRC Cylindrical Radius End Burr, INOX Cut, 6mm Shank, 6 x 16 and 12 x 25mm.