Pferd 21101656 ZYA Cylindrical Burr 6 x 16 mm, Cut 5, 6 mm Shank, ZYA 0616/6 Z5

The Pferd ZYA Cylindrical Burr is a tungsten carbide burr in cut 5 with a 6 mm shank (manufacturer-stated). This page lists 2 items, with head sizes of 6 x 16 and 12 x 25 mm (diameter x cut length) and total lengths of 55 to 65 mm.

The catalogue describes the ZYA as a cylindrical burr according to DIN 8032, with the cut conforming to DIN 8033, for general use on all materials (manufacturer-stated).

Cut 5 is the fine cut: the catalogue lists it for fine machining of steel, cast iron, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys, with a good surface (manufacturer-stated).

Special features listed in the catalogue: long tool life and a high surface finish; reduced wear on the tool drive from impact-free work without chatter marks, thanks to the high concentricity (manufacturer-stated).

Where this product is used

• Fine machining of steel, cast iron and stainless steel (INOX) (manufacturer-stated)
• Fine machining of nickel-based and cobalt-based alloys (manufacturer-stated)
• General use on all materials (manufacturer-stated)

Features

• Cut 5: fine cut for a good surface (manufacturer-stated)
• Cylindrical head without end cut, 6 mm shank (manufacturer-stated)
• Head sizes 6 x 16 and 12 x 25 mm; total length 55 to 65 mm (manufacturer-stated)
• Long tool life and a high surface finish (manufacturer-stated)
• Reduced wear on the tool drive from impact-free work without chatter marks, thanks to the high concentricity (manufacturer-stated)

Common specifications

Key specifications

Each item number is a separate head size; all share the 6 mm shank and cut 5.

Selecting the right option

Pick the head size for the job: d1 is the burr diameter and l2 the cut length, and the table shows the total length l1 of each item. Check that your tool holds a 6 mm shank. For higher stock removal the catalogue lists cut 3 PLUS (manufacturer-stated). Do not exceed the maximum permitted rotational speed, wear eye protection, hearing protection and a dust mask, and do not use a damaged burr (manufacturer-stated).

Related products

Same cut in other shapes: Pferd ZYAS Cylindrical End Cut Burr, Cut 5, 3 mm Shank, 2 x 10 to 6 x 13 mm and Pferd WRC Cylindrical Radius End Burr, Cut 5, 3 mm Shank, 3 x 13 and 6 x 13 mm. Same shape in other cuts: Pferd ZYA Cylindrical Burr, Cut 3 PLUS, 6 mm Shank, 4 x 13 to 16 x 25 mm and Pferd ZYA Cylindrical Burr, INOX Cut, 6 mm Shank, 6 x 16 and 12 x 25 mm.