Pferd 21115216 Conical Pointed Burr SKM, Cut 1, 12 x 25 mm, 6 mm Shank
Available
This Pferd conical pointed burr (SKM) is a tungsten carbide burr in cut 1 on a 6 mm shank (manufacturer-stated). This page lists 1 item, head size 12 x 25 mm (manufacturer-stated).
The PFERD catalogue describes cut 1 as a cut for machining non-ferrous metals, steel and cast iron, with high stock removal and good surfaces (manufacturer-stated).
The PFERD catalogue describes the SKM as a conical pointed burr with flattened tip according to DIN 8032, with a cut conforming to DIN 8033, for general use on all materials (manufacturer-stated).
Features listed: long tool life and high surface finish; reduced wear on the tool drive from impact-free work without chatter marks, thanks to the high concentricity (manufacturer-stated).
Where this product is used
- Machining non-ferrous metals, steel and cast iron (manufacturer-stated)
- High stock removal with good surfaces (manufacturer-stated)
Features
- Tungsten carbide, conical pointed shape (SKM) (manufacturer-stated)
- Cut 1: high stock removal with good surfaces (manufacturer-stated)
- 6 mm shank (manufacturer-stated)
- Head size 12 x 25 mm, overall length 65 mm (manufacturer-stated)
- Long tool life and high surface finish (manufacturer-stated)
- Reduced wear on the tool drive from impact-free work without chatter marks, thanks to the high concentricity (manufacturer-stated)
Key specifications
| Specification | Detail |
|---|---|
| Shape | Conical pointed shape (SKM) (manufacturer-stated) |
| Cut | 1 (Z1) (manufacturer-stated) |
| Material | Tungsten carbide (manufacturer-stated) |
| Shank diameter (d2) | 6 mm (manufacturer-stated) |
| Head sizes (d1 x l2) | 12 x 25 mm (manufacturer-stated) |
| Overall length (l1) | 65 mm (manufacturer-stated) |
| Cone angle | 26 deg (manufacturer-stated) |
Selecting the right option
Check the head size and shank against the job and your tool. The catalogue gives a cutting speed of 600 to 900 m/min for steels up to 1,200 N/mm2, and the rotational speed follows from the burr diameter (manufacturer-stated). Do not exceed the maximum permitted rotational speed, observe the recommended rotational speed (especially with long shanks), wear eye and hearing protection and a dust mask, and do not use a damaged burr or use the burr for cutting (manufacturer-stated).
Related products
Same shape with other cuts: Pferd Conical Pointed Burr SKM, Cut 3 PLUS, 6 x 18 to 12 x 25 mm, 6 mm Shank and Pferd Conical Pointed Burr SKM, ALLROUND, 6 x 18 and 12 x 25 mm, 6 mm Shank.
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
