Pferd 43306001 Knotted Cup Brush with Bridle TBGR 80 mm, M14 x 2, Steel Wire 0.50 mm

The Pferd TBGR is a knotted cup brush with bridle. It has an M14 x 2 thread and steel wire filament. Item 43306001 is 80 mm (brush diameter).

The catalogue describes the TBGR as suited to heavy-duty brushing such as deburring, cleaning, derusting and descaling, and removing spatter on large areas (manufacturer-stated).

Filament diameter is 0.50 mm. Optimum speed is 4,300 to 8,500 rpm and maximum speed is 8,500 rpm (manufacturer-stated).

Steel wire: high tensile and bending fatigue strength, temperature resistance up to 300°C (manufacturer-stated).

Special features listed in the catalogue: the bridle stops the wires spreading out sideways and lets the spread and flexibility of the filament be controlled; once the filament has worn down to the bridle, it can be removed from the bridle and used further, without affecting brushing behaviour; very stiff wire knots give an aggressive brushing effect (manufacturer-stated).

Where this product is used

• Suited to heavy-duty brushing such as deburring, cleaning, derusting and descaling, and removing spatter on large areas (manufacturer-stated)
• Steel wire is rated highly suitable for steel and cast iron, and suitable for plastics (manufacturer-stated)

Features

• Brush diameter 80 mm
• M14 x 2 thread (manufacturer-stated)
• Steel wire (ST), filament diameter 0.50 mm (manufacturer-stated)
• Optimum speed 4,300 to 8,500 rpm, maximum speed 8,500 rpm (manufacturer-stated)
• The bridle stops the wires spreading out sideways and lets the spread and flexibility of the filament be controlled (manufacturer-stated)
• Once the filament has worn down to the bridle, it can be removed from the bridle and used further, without affecting brushing behaviour (manufacturer-stated)

Key specifications

Selecting the right option

Check that the M14 x 2 thread matches your tool. The catalogue gives a recommended cutting speed of 15 to 45 m/s for cup brushes, depending on the application and below the maximum permitted speed (manufacturer-stated). Steel wire is rated not suitable for stainless steel, aluminium or non-ferrous metals (manufacturer-stated). Never exceed the maximum permitted speed marked on the brush, its label and in the catalogue (manufacturer-stated).

Related products

The 100 mm TBGR with bridle: Pferd Knotted Cup Brush with Bridle TBGR, Steel Wire 0.50 mm, 100 mm, M14 Thread (43308001).