Pferd 61339116 SG Steel Depressed-Centre Cut-Off Wheel 100 x 2.4 mm, 16 mm Bore

This page lists 4 Pferd SG Steel depressed-centre cut-off wheels, 100 to 230 mm in diameter and 2.4 and 3.2 mm thick. The catalogue describes the range as a Performance Line SG cut-off wheel for steel, with high cutting performance (manufacturer-stated).

The catalogue lists these wheels for cutting profiles and solid material in steel, and cutting out holes (manufacturer-stated).

Each item is a depressed-centre design EH (shape 42) wheel and the catalogue groups this range under angle grinders, cutting (manufacturer-stated).

Where this product is used

• Cutting profiles and solid material in steel, and cutting out holes (manufacturer-stated)
• Tool drive: angle grinders, cutting (manufacturer-stated)
• The label shows the material or materials each wheel is suitable for (manufacturer-stated)

Features

• Diameters 100 to 230 mm, thicknesses 2.4 and 3.2 mm, 16 and 22.23 mm bore (manufacturer-stated)
• Maximum speed from 6,600 to 15,300 rpm depending on diameter (manufacturer-stated)
• Depressed-centre design EH (shape 42) (manufacturer-stated)
• Cut-off wheel for steel with high cutting performance (manufacturer-stated)
• Thin wheels are described as giving fast, thin cuts with minimised burr formation (manufacturer-stated)

Common specifications

Safety markings and handling

• PFERD TOOLS is a founding member of the Organization for the Safety of Abrasives (oSa); the catalogue says its grinding tools carry the oSa mark and the EN 12413 standard number for bonded abrasives such as cut-off wheels (manufacturer-stated)
• Hand-held grinding tools with bond types B and BF, including cut-off wheels, must not be used after the expiry date marked on the label, in accordance with EN 12413; the date is stated as month and year (manufacturer-stated)
• Always observe the instructions on the grinding tool, the grinding machine and all accompanying user information; a tool that cannot be clearly identified should never be used (manufacturer-stated)
• The material information in the bottom section of the label shows which materials the wheel is suitable for (manufacturer-stated)

Key specifications

Each item number is a separate diameter and thickness combination; maximum speed depends on the diameter. Where the size option reads 178 mm, the catalogue lists the same wheel as 180 mm.

Selecting the right option

Choose the diameter to suit your angle grinder and its guard, and the thickness to suit the job. The catalogue width guide lists 2.4 mm at 50 to 125 mm diameter and 3.2 mm at 150 to 230 mm diameter for heavy-duty use (manufacturer-stated). Check the Max. RPM listed for the item against the rated speed of your angle grinder before fitting it. The catalogue safety notes say to use a guard, wear eye protection, hearing protection, gloves and a dust mask, follow the safety instructions and not use a damaged tool (manufacturer-stated).

Related products

Related items: Pferd SG Steel Flat Cut-Off Wheel, 100 to 230 mm, 2.4 and 3.2 mm Thick, Pferd Pipe Notching Raised Hub SG Steel Cut-Off Wheel 125 x 3.2 mm - Pack of 20 and Pferd PSF Steel Depressed-Centre Cut-Off Wheel, 100 to 230 mm, 2.4 to 3.2 mm Thick.