Pferd 44890030 Backing Pad GT, 115 mm, M14, Maximum 13,300 rpm

The Pferd GT backing pad is a flexible backing pad for fibre discs, used on a commercially available angle grinder. This page lists 3 items for 115, 125 and 180 mm tool diameters, all with an M14 spindle thread.

The catalogue describes the GT backing pad as a backing pad for fibre discs that adapts to contours thanks to high flexibility, and says it complies with ISO 15636 (manufacturer-stated).

The catalogue lists the GT backing pad for use with fibre discs on commercially available angle grinders (manufacturer-stated).

Where this product is used

• Fitting fibre discs to a commercially available angle grinder (manufacturer-stated)

Features

• GT backing pad for fibre discs, 115 to 180 mm (manufacturer-stated)
• Flexible, for adaptation to contours (manufacturer-stated)
• M14 spindle thread; maximum speed from 13,300 rpm (115 mm) down to 8,500 rpm (180 mm) (manufacturer-stated)

Common specifications

Key specifications

Each item number is one tool diameter. Maximum speed depends on the diameter, so each item lists its own.

Selecting the right option

Match the pad to the grinder and disc size. Keep the angle grinder at or below the maximum speed printed for the pad (manufacturer-stated). This pad is for fibre discs; COMBICLICK discs need a COMBICLICK backing pad.

Related products

Other backing pads for fibre discs: Pferd High Performance Backing Pad H-GT for Fibre Discs, 115 to 180 mm and Pferd Backing Pad HT-GT for Fibre Discs, 115 to 180 mm. Discs to use with this pad: Pferd Fibre Disc FS Aluminium Oxide, Slotted, 115 and 125 mm, Grits 16 to 120.