Pferd 21230083 Tree Shape Burr RBF, Cut 3 PLUS, 6 x 13 mm, 3 mm Shank

This Pferd tree shape burr with radius end (RBF) is a tungsten carbide burr in cut 3 PLUS on a 3 mm shank (manufacturer-stated). This page lists 1 item, head size 6 x 13 mm (manufacturer-stated).

The PFERD catalogue describes cut 3 PLUS as similar to cut 3 but with a cross cut, for machining steel, cast iron, stainless steel (INOX), nickel-based alloys and titanium alloys, with high stock removal and good surfaces (manufacturer-stated).

The PFERD catalogue describes the RBF as a tree-shaped burr with radius end according to DIN 8032, with a cut conforming to DIN 8033, for general use on all materials (manufacturer-stated).

Features listed: long tool life and high surface finish; reduced wear on the tool drive from impact-free work without chatter marks, thanks to the high concentricity (manufacturer-stated).

Where this product is used

• Machining steel, cast iron, stainless steel (INOX), nickel-based alloys and titanium alloys (manufacturer-stated)
• High stock removal with good surfaces (manufacturer-stated)

Features

• Tungsten carbide, tree shape with radius end (RBF) (manufacturer-stated)
• Cut 3 PLUS: cross-cut version of cut 3, with high stock removal and good surfaces (manufacturer-stated)
• 3 mm shank (manufacturer-stated)
• Head size 6 x 13 mm, overall length 43 mm (manufacturer-stated)
• Long tool life and high surface finish (manufacturer-stated)
• Reduced wear on the tool drive from impact-free work without chatter marks, thanks to the high concentricity (manufacturer-stated)

Key specifications

Selecting the right option

Check the head size and shank against the job and your tool. The catalogue gives a cutting speed of 450 to 600 m/min for steels up to 1,200 N/mm2, and the rotational speed follows from the burr diameter (manufacturer-stated). Do not exceed the maximum permitted rotational speed, observe the recommended rotational speed (especially with long shanks), wear eye and hearing protection and a dust mask, and do not use a damaged burr or use the burr for cutting (manufacturer-stated).

Related products

Same shape and cut in other sizes or shanks: Pferd Tree Shape Burr RBF, Cut 3 PLUS, 6 x 18 to 16 x 30 mm, 6 mm Shank and Pferd Tree Shape Burr RBF, Cut 3 PLUS, Extended Length, 9.5 x 19 and 12.7 x 25.4 mm, 6.35 mm Shank. Same shape with other cuts: Pferd Tree Shape Burr RBF, Cut 5, 3 x 7 and 6 x 13 mm, 3 mm Shank and Pferd Tree Shape Burr RBF, TOUGH, 10 x 20 and 12 x 25 mm, 6 mm Shank. Same cut in other shapes: Pferd Conical Radius End Burr KEL, Cut 3 PLUS, 5/16 x 7/8 to 1/2 x 1 1/16 in, 6.35 mm Shank and Pferd Conical Pointed Burr SKM, Cut 3 PLUS, 6 x 18 to 12 x 25 mm, 6 mm Shank.