Pferd 21222783 Pointed Tree Burr SPG 0613/3 Z3 PLUS, 6 x 13 mm, 3 mm Shank

The Pferd pointed tree burr SPG 0613/3 Z3 PLUS (item 21222783) is a shank-mounted tungsten carbide burr with a 3 mm shank. The head is 6 x 13 mm (diameter x cut length). Overall length is 43 mm.

The catalogue describes this SPG family as a pointed tree-shaped burr with a flattened tip for general use on all materials, with a good stock removal rate from the matching of tungsten carbide, geometry, cut and coating (manufacturer-stated).

The catalogue describes cut 3 PLUS as similar to cut 3 but with a cross cut, for machining steel, cast iron, stainless steel (INOX), nickel-based alloys and titanium alloys (manufacturer-stated).

Where this product is used

• Machining steel, cast iron, stainless steel (INOX), nickel-based alloys and titanium alloys (manufacturer-stated)
• High stock removal with good surfaces (manufacturer-stated)
• Deburring, chamfering, milling out for build-up welding preparation, machining weld seams and machining contours, and cleaning cast material (manufacturer-stated)

Features

• 6 mm head diameter, 13 mm cut length (manufacturer-stated)
• 3 mm shank, 43 mm overall length (manufacturer-stated)
• Cut 3 PLUS: cross cut, similar to cut 3 (manufacturer-stated)
• Reduced wear on the tool drive from impact-free work without chatter marks, thanks to the high concentricity (manufacturer-stated)
• Long tool life (manufacturer-stated)

Key specifications

Selecting the right option

Match the shank to your tool: item 21222783 has a 3 mm shank. Never exceed the maximum permitted rotational speed, wear eye protection, hearing protection and a dust mask, and observe the recommended rotational speed, especially with long shanks (manufacturer-stated).

Related products

Related burrs: Pferd Pointed Tree Burr SPG, Cut 3 PLUS, 6 x 18 to 12 x 25 mm, 6 mm Shank, Pferd Pointed Tree Burr SPG, Cut 3 PLUS, 1/4 x 5/8 to 1/2 x 1 in, 6.35 mm Shank and Pferd Pointed Tree Burr SPG, Cut 5, 3 x 7 to 3 x 13 mm, 3 mm Shank.