Pferd 33930001 Mounted Point Set SSO 5300 STEEL, 100 Pieces, 6 mm Shank

Pferd item 33930001 is the SSO 5300 STEEL mounted point set, listed as 100 pieces. The catalogue describes it as a set of 100 mounted points with a 6 mm shank diameter in the most common shapes and dimensions (manufacturer-stated).

The catalogue says the set is suited to grinding high-speed steel (HSS) moulded parts and to weld dressing of weld seams on steel constructions (manufacturer-stated).

Contents as printed in the catalogue: ten each of 16 x 20 mm, 20 x 25 mm, 25 x 6 mm, 25 x 32 mm, 32 x 16 mm, 32 x 32 mm and 40 x 20 mm in cylindrical shape, 20 x 32 mm in pointed tree shape and 25 x 70 mm in conical shape (manufacturer-stated).

The set is listed in coarse grit. The catalogue lists a vitrified bond for the STEEL type, with a recommended cutting speed of 30 to 50 m/s (manufacturer-stated).

Where this product is used

• Grinding HSS moulded parts and weld dressing of weld seams on steel constructions (manufacturer-stated)
• General use on steel materials, particularly on surfaces (manufacturer-stated)
• Rated highly suitable in the catalogue for: steels up to 1,200 N/mm² (below 38 HRC): universal and surface grinding; hardened, heat-treated steels over 1,200 N/mm² (over 38 HRC): universal grinding; cast steel: surface grinding (manufacturer-stated)

Features

• Set of 100 mounted points
• 6 mm shank diameter, coarse grit (manufacturer-stated)
• Cylindrical, pointed tree and conical shapes (manufacturer-stated)
• High grinding performance and stock removal rate in general use on steel materials (manufacturer-stated)
• Shortened grinding times and cost savings thanks to the high stock removal rate (manufacturer-stated)

Key specifications

Selecting the right option

Check the speed and shank details against each point in the set before use: the set page does not print speeds, so use the ratings that apply to the individual shapes. The catalogue states that all PFERD TOOLS mounted points are approved for a maximum operating speed of 50 m/s, that the maximum permitted rotational speeds for each shank length and shank diameter are defined in DIN 69170 based on EN 12413 to avoid buckling of the shank, and that at least 10 mm of the shank must be clamped. Wear eye protection, hearing protection, a dust mask and gloves (manufacturer-stated).

Related products

Related Pferd STEEL mounted points and accessories: Pferd STEEL A 1 Mounted Point, 19 x 64 mm, Grit 30, Pferd STEEL Cylindrical Mounted Point, 13 x 25 mm, Grit 46 and Pferd SE 702212 CU Dressing Stone, 70 x 12 x 22 mm.