Pferd 31330502 Mounted Point CAST EDGE Cylindrical 40 x 20 mm, Grit 24, 6 mm Shank

Item 31330502 is a CAST EDGE cylindrical mounted point with a 40 x 20 mm head in grit 24 on a 6 mm shank (manufacturer-stated). It is listed as a pack of 5.

The catalogue describes the CAST EDGE type as particularly good for edge grinding, for deburring and for grinding out sand inclusions and metal contamination on grey and nodular cast iron (manufacturer-stated).

It describes the cylindrical shape ZY as suited to grinding bores, radii and contours (manufacturer-stated).

The catalogue lists a vitrified bond for this type, a recommended cutting speed of 30 to 50 m/s, and for this item an optimum speed of 19,000 rpm and a maximum speed of 23,800 rpm (manufacturer-stated).

Where this product is used

• Edge grinding and deburring on grey and nodular cast iron (manufacturer-stated)
• Grinding out sand inclusions and metal contamination (manufacturer-stated)
• Rated highly suitable in the catalogue for: grey and white cast iron: edge grinding (manufacturer-stated)
• Rated suitable for: grey and white cast iron: surface grinding (manufacturer-stated)

Features

• CAST EDGE type, cylindrical (manufacturer-stated)
• Head size 40 x 20 mm, grit 24 (manufacturer-stated)
• 6 mm shank, 40 mm shank length (L2) (manufacturer-stated)
• Optimum speed 19,000 rpm, maximum speed 23,800 rpm (manufacturer-stated)
• Highly dimensionally stable due to the high bond content (manufacturer-stated)
• Economical to use due to high edge stability even on low-speed tool drives (manufacturer-stated)

Key specifications

Selecting the right option

Check that the 6 mm shank suits your collet. A higher grit number is a finer abrasive. Keep to the maximum speed printed for the item. The catalogue states that all PFERD TOOLS mounted points are approved for a maximum operating speed of 50 m/s, that the maximum permitted rotational speeds for each shank length and shank diameter are defined in DIN 69170 based on EN 12413 to avoid buckling of the shank, and that at least 10 mm of the shank must be clamped. Wear eye protection, hearing protection, a dust mask and gloves (manufacturer-stated).

Related products

Other Pferd CAST EDGE mounted points: Pferd CAST EDGE Series A Mounted Points, Grit 30, 6 mm Shank and Pferd ALU Cylindrical Mounted Point, 16 x 20 mm, Grit 80. Dressing stone: Pferd SE 702212 CU Dressing Stone, 70 x 12 x 22 mm.