Pferd 31136408 Mounted Point ALU Cylindrical 32 x 32 mm, Grit 80, 6 mm Shank

Item 31136408 is an ALU cylindrical mounted point with a 32 x 32 mm head in grit 80 on a 6 mm shank (manufacturer-stated). It is listed as a pack of 5.

The catalogue describes the ALU type as used to remove burrs on cast aluminium parts and for chamfering on aluminium profiles for weld-seam preparation (manufacturer-stated).

It describes the cylindrical shape ZY as suited to grinding bores, radii and contours (manufacturer-stated).

The catalogue lists a vitrified bond for this type, a recommended cutting speed of 20 to 40 m/s, and for this item an optimum speed of 15,000 rpm and a maximum speed of 25,700 rpm (manufacturer-stated).

Where this product is used

• Removing burrs on cast aluminium parts (manufacturer-stated)
• Chamfering on aluminium profiles for weld-seam preparation (manufacturer-stated)
• Rated highly suitable in the catalogue for: soft non-ferrous metals (aluminium alloys, brass, copper, zinc) (manufacturer-stated)
• Rated suitable for: hard non-ferrous metals (bronze, titanium, hard aluminium alloys); fibre-reinforced plastics, thermoplastics, rubber and wood (manufacturer-stated)

Features

• ALU type, cylindrical (manufacturer-stated)
• Head size 32 x 32 mm, grit 80 (manufacturer-stated)
• 6 mm shank, 40 mm shank length (L2) (manufacturer-stated)
• Optimum speed 15,000 rpm, maximum speed 25,700 rpm (manufacturer-stated)
• The special impregnation means there is no clogging when working on soft, lubricating or tough materials (manufacturer-stated)
• High grinding performance and stock removal rate (manufacturer-stated)

Key specifications

Selecting the right option

Check that the 6 mm shank suits your collet. A higher grit number is a finer abrasive. Keep to the maximum speed printed for the item. The catalogue states that all PFERD TOOLS mounted points are approved for a maximum operating speed of 50 m/s, that the maximum permitted rotational speeds for each shank length and shank diameter are defined in DIN 69170 based on EN 12413 to avoid buckling of the shank, and that at least 10 mm of the shank must be clamped. Wear eye protection, hearing protection, a dust mask and gloves (manufacturer-stated).

Related products

Other Pferd ALU mounted points: Pferd ALU Cylindrical Mounted Point, 16 x 20 mm, Grit 80 and Pferd Cylindrical Mounted Point 25 x 25 mm, Grit 30. Dressing stone: Pferd SE 702212 CU Dressing Stone, 70 x 12 x 22 mm.