Pferd 32207612 Mounted Point INOX EDGE Tapered 32 x 32 mm, Grit 24, 6 mm Shank

Item 32207612 is an INOX EDGE tapered mounted point with a 32 x 32 mm head in grit 24 on a 6 mm shank (manufacturer-stated). It is listed as a pack of 5.

The catalogue describes the INOX EDGE type as used for weld dressing on fillet welds, removing burrs and grinding chamfers on high-temperature-resistant alloys and stainless steel components (manufacturer-stated).

It describes the conical shape KE as designed for a comfortable working position during surface grinding and grinding of chamfers (manufacturer-stated).

The catalogue lists a resinoid bond for this type, a recommended cutting speed of 35 to 50 m/s, and for this item an optimum speed of 29,000 rpm and a maximum speed of 29,800 rpm (manufacturer-stated).

Where this product is used

• Weld dressing on fillet welds and removing burrs on stainless steel components (manufacturer-stated)
• Grinding chamfers on high-temperature-resistant alloys (manufacturer-stated)
• Rated highly suitable in the catalogue for: stainless steel (INOX), austenitic and ferritic: edge grinding (manufacturer-stated)
• Rated suitable for: steels up to 1,200 N/mm²: edge grinding; cast steel: edge grinding; stainless steel: surface grinding; grey and white cast iron: surface and edge grinding (manufacturer-stated)

Features

• INOX EDGE type, tapered (manufacturer-stated)
• Head size 32 x 32 mm, grit 24 (manufacturer-stated)
• 6 mm shank, 40 mm shank length (L2) (manufacturer-stated)
• Optimum speed 29,000 rpm, maximum speed 29,800 rpm (manufacturer-stated)
• Cool grinding, particularly suitable for temperature-sensitive materials (manufacturer-stated)
• High grinding comfort due to low-vibration grinding and high dimensional stability on edges (manufacturer-stated)

Key specifications

Selecting the right option

Check that the 6 mm shank suits your collet. A higher grit number is a finer abrasive. Keep to the maximum speed printed for the item. The catalogue states that all PFERD TOOLS mounted points are approved for a maximum operating speed of 50 m/s, that the maximum permitted rotational speeds for each shank length and shank diameter are defined in DIN 69170 based on EN 12413 to avoid buckling of the shank, and that at least 10 mm of the shank must be clamped. Wear eye protection, hearing protection, a dust mask and gloves (manufacturer-stated).

Related products

Other Pferd INOX EDGE mounted points: Pferd INOX EDGE A 11 Mounted Point, 22 x 50 mm, Grit 30 and Pferd Cylindrical Mounted Point 50 x 8 mm, Grit 30. Dressing stone: Pferd SE 702212 CU Dressing Stone, 70 x 12 x 22 mm.