Pferd 21722260 Oval Shape Burr TRE 1016/6,35 TOUGH, 6.35 mm Shank

The Pferd oval burr TRE 1016/6,35 TOUGH (item 21722260) is a shank-mounted tungsten carbide burr with a 6.35 mm shank. Overall length is 60.33 mm.

The catalogue describes this TRE family as an oval burr for tough applications in dockyards, foundries and steel construction (manufacturer-stated).

The catalogue lists the TOUGH cut for cast iron and steel below 54 HRC; it is impact-resistant, minimizes tooth chipping and breakage, and can also be used at low rotational speeds and under impact loads (manufacturer-stated).

Where this product is used

• Tough applications in dockyards, foundries and steel construction (manufacturer-stated)
• Cast iron and steel below 54 HRC (manufacturer-stated)
• Deburring, chamfering, milling out for build-up welding preparation, machining weld seams and machining contours, and cleaning cast material (manufacturer-stated)

Features

• 6.35 mm shank, 60.33 mm overall length (manufacturer-stated)
• Impact-resistant TOUGH cut (manufacturer-stated)
• Reduced wear on the tool drive from impact-free work without chatter marks, thanks to the high concentricity (manufacturer-stated)
• Can also be used at low rotational speeds (manufacturer-stated)

Key specifications

Selecting the right option

Match the shank to your tool: item 21722260 has a 6.35 mm shank. The head size of item 21722260 is not published here because the store and PFERD sources differ: confirm it before you order. Never exceed the maximum permitted rotational speed, wear eye protection, hearing protection and a dust mask, and observe the recommended rotational speed, especially with long shanks (manufacturer-stated).

Related products

Related burrs: Pferd Oval Shape Burr TRE 1016/6 TOUGH, 10 x 16 mm, 6 mm Shank, Pferd Oval Shape Burr TRE, Cut 3 PLUS, 1/4 x 3/8 to 1/2 x 7/8 in, 6.35 mm Shank and Pferd Oval Shape Burr TRE, MX NCC Cut, 3/8 x 5/8 to 5/8 x 1 in, 6.35 mm Shank.