Pferd 67784115 POLIFAN Conical Flap Disc 115 mm, Z SG POWER STEELOX, Grit 40

The Pferd POLIFAN Z SG POWER STEELOX is a conical flap disc with zirconia alumina flaps, listed by PFERD in its Performance Line SG range (manufacturer-stated). This page lists 8 items in 115 to 180 mm diameters, grits 40, 60 and 80.

The catalogue describes the Z SG POWER STEELOX as a flap disc with an aggressive stock removal rate and excellent tool life, suitable for work on weld seams, chamfering and deburring (manufacturer-stated).

The conical type has a narrower grinding area for work on weld seams, chamfering and deburring, with optimum use of the flap configuration at a contact angle of 10 to 25 degrees (manufacturer-stated).

Fast work progress and high economic efficiency from the aggressive stock removal rate (manufacturer-stated).

Where this product is used

• Work on weld seams (manufacturer-stated)
• Chamfering and deburring (manufacturer-stated)

Features

• Conical flap disc, 115 to 180 mm
• Zirconia alumina flaps, grits 40, 60 and 80 (manufacturer-stated)
• Fast work progress and high economic efficiency from the aggressive stock removal rate (manufacturer-stated)
• Aggressiveness maintained over the entire tool life (manufacturer-stated)
• Fewer tool changes due to the excellent tool life (manufacturer-stated)
• Bore 22.23 mm; maximum speed set by disc diameter, see table (manufacturer-stated)

Common specifications

Key specifications

Each item number is one grit and diameter combination. Maximum speed depends on the disc diameter, so each item lists its own.

Selecting the right option

A higher grit number is a finer abrasive. The catalogue notes that with POLIFAN flap discs a grit one grade coarser can be selected to reach the same surface as with fibre discs (manufacturer-stated). The catalogue pairs the shapes with jobs: flat (PFF) for surface grinding, conical (PFC) for weld seams, chamfering and deburring, and radial (PFR, CURVE) for fillet welds (manufacturer-stated). Check the maximum speed given for the item and keep the angle grinder at or below it (manufacturer-stated).

Related products

Other POLIFAN flap discs: Pferd POLIFAN Conical Flap Disc A-COOL SG INOX+ALU, Pferd POLIFAN Conical Flap Disc A SG STEELOX and Pferd POLIFAN Conical Flap Disc CO-FREEZE SG INOX.