Pferd 41213212 Poliflex Fine Grinding Point PF ZY LR, 10 x 15 mm, 3 mm Shank, Grit 120

Item 41213212 is a Poliflex PF ZY LR fine grinding point in cylindrical shape with a 10 x 15 mm head on a 3 mm shank, grit 120 (manufacturer-stated). It is listed as a pack of 10.

The catalogue describes the LR bond as a hard, sturdy bond with white aluminium oxide, and the point as a grinding point in cylindrical shape for fine grinding of small surfaces (manufacturer-stated).

It says the point is suitable for use on surfaces and produces a fine, shiny surface finish (manufacturer-stated).

For this item the catalogue lists an optimum speed of 38,000 rpm, a maximum speed of 57,200 rpm and a recommended cutting speed of 15 to 20 m/s (manufacturer-stated).

Where this product is used

• Fine grinding of small surfaces (manufacturer-stated)
• Produces a fine, shiny surface finish (manufacturer-stated)

Features

• Poliflex PF ZY LR, cylindrical shape (manufacturer-stated)
• 10 x 15 mm head, 3 mm shank, 30 mm shank length (L2), grit 120 (manufacturer-stated)
• Optimum speed 38,000 rpm, maximum speed 57,200 rpm (manufacturer-stated)
• White aluminium oxide abrasive in a hard, sturdy bond (manufacturer-stated)

Key specifications

Selecting the right option

Check that the 3 mm shank suits your collet. The catalogue says never to exceed the maximum rotational speed, to clamp at least 10 mm of the shank, and that each pack carries the speed rating for the unsupported shank length (manufacturer-stated). Wear eye protection, hearing protection, gloves and a dust mask, and follow the safety instructions (manufacturer-stated).

Related products

Other Pferd Poliflex fine grinding points: Pferd Poliflex PF ZY LR Point, 8 x 12 mm, 3 mm Shank and Pferd Poliflex PF ZY PUR-MH Point, 20 x 30 mm, 6 mm Shank. Dressing stone for profiling Poliflex points: Pferd SE 702212 CU Dressing Stone, 70 x 12 x 22 mm.