Pferd 62208626 SG STEEL Depressed Centre Grinding Wheel 76 x 6.3 mm, 10 mm Bore

The Pferd SG STEEL is an E (type 27) depressed-centre grinding wheel for steel, for use on an angle grinder. This page lists two small sizes: a 76 mm wheel with a 10 mm bore and a 100 mm wheel with a 16 mm bore.

The catalogue places it in the Performance Line SG and describes it as a grinding wheel for steel with high grinding performance and very good tool life (manufacturer-stated).

It is listed as suitable for surface grinding, grouting, chamfering and work on weld seams and fillet welds (manufacturer-stated).

Features listed are fast work progress and fewer tool changes due to the very good tool life (manufacturer-stated).

Where this product is used

• Surface grinding, grouting and chamfering on steel (manufacturer-stated)
• Work on weld seams and fillet welds (manufacturer-stated)

Features

• Aluminium oxide abrasive, depressed-centre design E (type 27) (manufacturer-stated)
• 76 x 6.3 mm with a 10 mm bore, and 100 x 4.1 mm with a 16 mm bore (manufacturer-stated)
• Maximum speed 20,200 rpm (76 mm) and 15,300 rpm (100 mm) (manufacturer-stated)
• Fewer tool changes due to the very good tool life (manufacturer-stated)

Common specifications

Key specifications

Item 62208626 is 76 mm with a 10 mm bore; item 62210426 is 100 mm with a 16 mm bore. The maximum speed differs with diameter.

Selecting the right option

Choose the diameter to suit your angle grinder guard and spindle speed, and check that the bore matches the grinder. Never exceed the maximum speed printed for the item. The catalogue says tools with bonded abrasives (grinding wheels) carry the EN 12413 number and the oSa mark, so check the label before use (manufacturer-stated).

Related products

For stainless steel see Pferd SG INOX Grinding Wheel, and for the Universal Line wheels for steel and cast iron see Pferd PSF STEEL Grinding Wheel.