M5 (3.2 mm) Swage Stud Terminal, 316 Stainless Steel - STEA4M5X32
Available
The Right Hand Thread Swage Stud Terminal, 316 Stainless Steel is a stainless swage terminal with a threaded stud. The swage end is pressed onto wire rope, and the stud takes a nut or a turnbuckle.
This listing has 4 variants covering sizes M5 (3.2 mm) to M10 (5 mm). Pack quantities depend on size: packs of 2 to 10.
Made from 316 (A4) stainless steel, the grade normally specified for chloride-exposed work such as coastal installations, swimming pools, marine fittings and food-processing plant. Metric sizes are written M followed by the nominal thread diameter in millimetres, so M10 is a 10 mm thread.
Austenitic stainless steel is generally non-magnetic, although cold-worked parts can show weak magnetism. Stainless threads can gall (seize) when tightened under load or at speed. A smear of anti-seize on the thread and a steady tightening speed reduce the risk.
Where this product is used
- Balustrade and wire fencing
- Small sizes for enclosures, instruments and light fittings
- Shade sails, awnings and tensioned structures
- Food and beverage processing equipment
- Boat, jetty and waterfront structures
- Marine rigging, boat and yacht fittings
Features
- A4 (316) stainless steel with molybdenum, for coastal and chloride-exposed settings
- Threaded stud, right hand or left hand
- Metric thread sizes match the nuts, bolts and tapped holes in most Australian-supplied equipment
- Choice of 4 sizes, M5 (3.2 mm) to M10 (5 mm)
- Pack quantities to suit trade and bulk buying: packs of 2 to 10
- Swaged onto wire rope
Key specifications
| Specification | Detail |
|---|---|
| Product | Right Hand Thread Swage Stud Terminal |
| Type | Stainless swage terminal with a threaded stud |
| Sizes available | M5 (3.2 mm) to M10 (5 mm) |
| Thread hand | Right Hand |
| Pack size | 2 to 10, by size |
| Material | A4 (316) stainless steel |
| Magnetic response | Generally non-magnetic (austenitic); cold-worked parts can show weak magnetism |
| Thread system | Metric |
| Typical environment | Coastal, marine, pool and food-processing use |
| Key features | Swaged onto wire rope; Threaded stud, right hand or left hand |
| Listed variants | 4 |
| Fitting tip | Use anti-seize on the thread to reduce galling |
Selecting the right option
Check the thread hand shown in the product name. Right hand and left hand terminals are used as a pair with a turnbuckle or rigging screw. Choose the terminal by the wire rope diameter shown on the variant.
Important
This product is not stated as lifting rated in the supplier data. Do not use it to lift or suspend people or loads unless it is marked with a working load limit (WLL). Rigging and lifting hardware should be selected, inspected and used in line with your site procedures and the relevant Australian Standards, and a qualified rigger should be consulted for any lift.
Related products
Also available: Left Hand Thread Swage Stud Terminal - 316 Stainless Steel.
Resources
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
-
M5 (3.2 mm)
Model Number: STEA4M5X32
-
M6 (3.2 mm)
Model Number: STEA4M6X32
-
M6 (4 mm)
Model Number: STEA4M6X4
-
M10 (5 mm)
Model Number: STEA4M10X5
