Hobson AS88YCM101000 M10 Sampsonrod, Class 8.8, Zinc Yellow Passivate, 1m

The Hobson Sampsonrod is fully threaded along its length (metric thread, zinc yellow passivate finish), supplied in 1m lengths. This page lists 5 items: M10 to M24.

Hobson lists class 8.8 as high tensile, and its class and grade chart pairs class 8.8 with imperial grade 5 (manufacturer-stated).

The pitch shown for each size is the coarse pitch given in the Hobson thread table (manufacturer-stated).

The High Tensile Stock List heading for the catalogue items names DIN 975 (manufacturer-stated).

Pack quantity is shown for each item in the table: Pack of 10, Pack of 20 and Pack of 5.

Where this product is used

• Cut to length and fitted with nuts and washers as a stud, tie rod or fixing of a set length
• Joining parts with matching nuts of the same thread form, diameter and pitch
• Replacing a bolt where a length that is not standard is needed

Features

• 5 sizes: M10 to M24
• Metric thread, fully threaded along its length
• Zinc yellow passivate finish
• Supplied in 1m lengths
• Minimum tensile strength for each size from the Hobson guide, shown in the table (manufacturer-stated)
• DIN 975 named by Hobson for these items (manufacturer-stated)

Common specifications

Key specifications

Pack weights are as printed in the Hobson High Tensile Stock List, April 2011 (manufacturer-stated).

Selecting the right option

Choose the thread form first: the rod and its nut must match in thread form, diameter and pitch. Metric sizes are the nominal diameter in millimetres; compare the pitch in the table with your nut. The length shown is the full length of the rod; it can be cut to suit. Strength figures are the minimum tensile strengths for the class or grade and size range in the Hobson guide, which is a head-marking table, so treat them as the class or grade minimum and not a test result for the rod (manufacturer-stated). For a different strength level see Hobson Allthread Rod, Class 4.6 UTS, Plain, M6 to M56, 1m.

Related products

Related rods: Hobson Metric Fine Sampsonrod, Class 8.8, Hot Dip Galvanised, M36, 1m, Hobson Metric Fine Sampsonrod, Class 8.8, Plain, M10 to M30, 1m and Hobson UNC Sampsonrod, Grade 5, Hot Dip Galvanised, 3/4", 3ft, Box of 5.