SIT Brass Crimped Cup Brush 75mm, T80.02BRS | T80.02BRS

This SIT cup brush is 75 mm across with crimped brass wire, for an angle grinder. It comes with an M10 or an M14 thread.

Crimped wire is used for surface deburring, polishing and surface preparation, and acts less aggressively than twisted wire. Brass wire is softer than steel wire, which makes it a lighter-duty choice for deburring, polishing and cleaning.

Where this product is used

• Surface deburring and polishing
• Surface preparation
• Rust and scale removal from flat surfaces
• Weld cleaning

Features

• Available in 2 sizes: 75 mm and 75 mm
• Mounting: M10 thread and M14 thread, for angle grinders
• Maximum speed 14,000 rpm
• Crimped wire for surface deburring, polishing and preparation
• Made in Italy
• Heavy duty brush for use on an angle grinder
• Used on metal, wood, rubber, stone and marble surfaces

Key specifications

Options and part numbers

Selecting the right option

Angle grinders up to 100 mm generally have an M10 x 1.5 thread, and grinders of 115 mm and above generally have an M14 x 2 thread, so check the thread on your grinder before you order. Match the brush to your machine and do not run it above its maximum speed rating. Wear eye protection and gloves when brushing, because wire can break off during use. Check site rules before using any wire brush where flammable gas or dust may be present.

Related products

See also SIT Steel Crimped Cup Brush 75mm, M10 BT80.02, SIT Stainless Steel Crimped Cup Brush 75mm, M10 BT80.02SS and SIT Steel Twist Knot Cup Brush 70mm, M10 BTU71.02.