SIT Steel Crimped End Brush 10mm, P10 | P10
Available
These SIT end brushes have a 6 mm shaft for a hand drill or die grinder. There are two crimped steel wire sizes, 10 mm and 25 mm, and a 20 mm abrasive nylon version in 120 grit (red).
Crimped wire is used for surface deburring, polishing and surface preparation, and acts less aggressively than twisted wire. The abrasive nylon end brush removes weld discolouration on metal and leaves a satin finish. Red nylon is the more aggressive grade.
Where this product is used
- Surface deburring and polishing
- Tight areas, corners and edges
- Removing weld discolouration from metal
- Rust and weld scale removal
Features
- Three sizes: 10 mm and 25 mm crimped steel, 20 mm abrasive nylon
- 6 mm shaft, for hand drills and die grinders
- Crimped steel versions for surface deburring and polishing
- Abrasive nylon version leaves a satin finish on metal
- Made in Italy (crimped steel) and Europe (abrasive nylon)
Key specifications
| Specification | Detail |
|---|---|
| Brand | SIT |
| Sizes | 10 mm, 20 mm and 25 mm |
| Fill | Crimped steel wire; abrasive nylon (20 mm) |
| Mounting | 6 mm shaft |
| Use with | Hand drills and die grinders |
Options and part numbers
| Option | Part number | Fill | Maximum speed |
|---|---|---|---|
| 10 mm end brush, crimped steel | P10 | Crimped steel wire | 2,000 rpm |
| 20 mm end brush, abrasive nylon | BP20A | Abrasive nylon, 120 grit (red) | 4,500 rpm |
| 25 mm end brush, crimped steel | P25 | Crimped steel wire | 18,000 rpm |
Selecting the right option
Check that the 6 mm shaft suits your drill chuck or die grinder collet. Match the brush to your machine and do not run it above its maximum speed rating. Wear eye protection and gloves when brushing, because wire can break off during use.
Related products
See also SIT Steel Crimped End Brush 20mm, 6mm Shaft P20, SIT Steel Crimped End Brush 30mm, 6mm Shaft P30 and SIT Encapsulated Crimped End Brush 22mm, 6mm Shaft PV22.
Resources
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
SIT End Brushes, 6mm Shaft - Crimped Steel and Abrasive Nylon: 2000
SKU: A0154806 | Model: P10
This is the max rmp 2000 option of the SIT End Brushes, 6mm Shaft - Crimped Steel and Abrasive Nylon. Key details for this option: brush material Steel, mounting size M6.
SIT Steel Crimped End Brush
High quality crimped wire end brush, spindle mounted for use in Hand drills & Die grinders
Ideally used on a hand drill or die grinder for light duty surface deburring & polishing.
Also suitable for removing rust, glue, rubber or residue from metal surfaces
Key Points:
Made in Italy
Highly resistant crimped wire wheel brush with high wire density
Long service life and great performance in many industrial applications
Always wear protective clothing & follow your tools safety instructions
Never exceed the maximum RPM