M6 Slip Hook Swivel, 316 Stainless Steel - SHSA4M6

The Slip Hook Swivel A4 (316) is a hook with a swivel top, so the hook can turn under load without twisting the line or chain.

Supplied in 316 (A4) stainless steel. The molybdenum in A4 gives better resistance to chlorides than A2 (304), so it is the usual choice near the coast, around pools and in marine and food-processing environments.

This listing has 4 variants covering sizes M6 to M12. Every size comes in packs of 5.

In wet conditions, keep stainless steel apart from aluminium and galvanised steel with a washer or sleeve, to reduce the risk of galvanic corrosion.

Where this product is used

• Swimming pool and spa equipment
• Coastal and architectural fittings
• Balustrade and wire fencing
• Outdoor fittings exposed to salt air
• Marine rigging, boat and yacht fittings

Features

• Choice of 4 sizes, M6 to M12
• Hook with a latch or throat for connecting to a ring or eye
• A4 (316) stainless steel with molybdenum, for coastal and chloride-exposed settings
• Swivel top prevents twisting
• Supplied in packs of 5

Key specifications

Selecting the right option

Pick the hook by the size shown on the variant. This listing is categorised as lifting hardware, but the supplier data does not state a working load limit (WLL).

Important

This product is not stated as lifting rated in the supplier data. Do not use it to lift or suspend people or loads unless it is marked with a working load limit (WLL). Rigging and lifting hardware should be selected, inspected and used in line with your site procedures and the relevant Australian Standards, and a qualified rigger should be consulted for any lift.