M32 Fixed Eye Snap Shackle, 316 Stainless Steel - SSFA4M32

The Snap Shackle, Fixed Eye, A4 316 Stainless Steel is a quick-release shackle with a spring-loaded pin and a fixed eye. It can be opened and closed with one hand.

Supplied in 316 (A4) stainless steel. The molybdenum in A4 gives better resistance to chlorides than A2 (304), so it is the usual choice near the coast, around pools and in marine and food-processing environments.

This listing has 4 variants covering sizes M32 to M96. Pack quantities depend on size: packs of 2 to 5.

Use stainless washers and nuts with stainless fasteners, so the whole joint is made of the same material.

Where this product is used

• Outdoor fittings exposed to salt air
• Shade sail and awning tie-offs
• Quick-release rope and line connections
• Food and beverage processing equipment
• Sails, flags and halyards

Features

• Choice of 4 sizes, M32 to M96
• Fixed eye at the base
• A4 (316) stainless steel with molybdenum, for coastal and chloride-exposed settings
• Spring-loaded pin for quick release
• Supplied in packs of 2 to 5

Key specifications

Selecting the right option

Pick the shackle by the size shown on the variant. Check that the release cannot be opened accidentally by the line movement in your use.

Important

This product is not stated as lifting rated in the supplier data. Do not use it to lift or suspend people or loads unless it is marked with a working load limit (WLL). Rigging and lifting hardware should be selected, inspected and used in line with your site procedures and the relevant Australian Standards, and a qualified rigger should be consulted for any lift.