Stahlwille SW14/17 Long Combination Spanner Set, 17 Pieces, 6 to 22 mm
Available
The Stahlwille 14/17 is a long metric combination spanner set of 17 pieces from 6 to 22 mm across flats. Each spanner has the same size at both ends: an open end with the jaw angled at 15 degrees and a 12-point ring offset by 10 degrees. The datasheet lists DIN 3113 Form B / ISO 7738 Form B (manufacturer-stated). The set is supplied in a polyester roll-up pouch with a hook-and-loop closure and mesh inserts.
The set contains the 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21 and 22 mm spanners. They are the individually sold Stahlwille 14 long spanners, listed with their item numbers below, so a worn or missing size can be replaced from the range. Stahlwille states a set weight of 1,874 g. Stahlwille describes the long 14 design as giving higher power transmission. The ring has the Stahlwille Anti-Slip-Drive (AS-Drive) profile, which Stahlwille says puts the force on the flanks of the bolt or nut rather than the corners. The spanners are Chrome Alloy Steel, chrome-plated. Stahlwille states the spanners are drop-forged, hardened and cooled in an oil bath, with a double-T profile for bending strength, a round finish for grip, thin-walled rings for hard-to-reach fastening points and a reinforced transition from jaw to shaft, where the highest forces act (Offset Shaft Design).
Where this product is used
- Nuts and bolts from 6 to 22 mm across flats
- Ring end for a firm hold, open end for quick turns or where a ring cannot be slipped over the fastener
- A graded set for a workshop bench, service vehicle or maintenance kit
Features
- 17-piece set, 6 to 22 mm across flats (manufacturer-stated)
- Combination spanners, same size at both ends (manufacturer-stated)
- Jaw angled at 15 degrees, ring offset by 10 degrees (manufacturer-stated)
- 12-point AS-Drive ring (manufacturer-stated)
- Polyester roll-up pouch with hook-and-loop closure and mesh inserts (manufacturer-stated)
- Set weight 1,874 g (manufacturer-stated)
- Chrome Alloy Steel, chrome-plated (manufacturer-stated)
- Listed to DIN 3113 Form B / ISO 7738 Form B (manufacturer-stated)
Common specifications
| Specification | Detail |
|---|---|
| Pieces | 17 |
| Size range | 6 to 22 mm |
| Set weight | 1,874 g |
| Packaging | Polyester roll-up pouch |
| Jaw angle | 15 degrees |
| Ring offset angle | 10 degrees |
| Ring | 12-point (double hexagon) ring with the AS-Drive profile |
| Standard | DIN 3113 Form B / ISO 7738 Form B (manufacturer-stated) |
| Material | Chrome Alloy Steel, chrome-plated |
Key specifications
| Width across flats (both ends) | Item no. | Length |
|---|---|---|
| 6 mm | 40100606 | 125 mm |
| 7 mm | 40100707 | 135 mm |
| 8 mm | 40100808 | 145 mm |
| 9 mm | 40100909 | 155 mm |
| 10 mm | 40101010 | 165 mm |
| 11 mm | 40101111 | 180 mm |
| 12 mm | 40101212 | 180 mm |
| 13 mm | 40101313 | 195 mm |
| 14 mm | 40101414 | 210 mm |
| 15 mm | 40101515 | 215 mm |
| 16 mm | 40101616 | 230 mm |
| 17 mm | 40101717 | 240 mm |
| 18 mm | 40101818 | 255 mm |
| 19 mm | 40101919 | 265 mm |
| 20 mm | 40102020 | 280 mm |
| 21 mm | 40102121 | 280 mm |
| 22 mm | 40102222 | 300 mm |
Item numbers are the Stahlwille order numbers of the single spanners in the set. Lengths are manufacturer-stated.
Selecting the right option
Pick the set by the sizes you use most. The spanners in it are also sold singly in the Stahlwille 14 long combination spanners (single), so one missing or worn size can be replaced on its own. Nearby sets: SW14/15 long combination spanner set, 15 pieces, 6 to 32 mm.
Related products
Related Stahlwille products: Stahlwille 14 long combination spanners (single), SW14/15 long combination spanner set, 15 pieces, 6 to 32 mm, 10 MOTOR double open end spanners, metric ratchet ring spanners and metric flare nut spanners.
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
