Stahlwille SW730NA/10 180-900 in·lb 730NA Inch-Pound Torque Wrench, 9 x 12 mm holder

The Stahlwille MANOSKOP 730NA is the inch-pound version of the 730N clicking torque wrench for interchangeable insert tools. This listing covers five sizes, from a/2 (40 to 180 in·lb) to a/40 (800 to 3600 in·lb), with a 9 x 12 mm or 14 x 18 mm insert tool holder (manufacturer-stated).

Torque is set one-handed with the QuickSelect knob (pull, set, lock) and read from a twin in·lb and ft·lb scale with a ring scale for fine setting. The wrench gives a noticeable double signal when the preset torque is reached, and the measuring element is only under load while force is being applied, so there is no need to reset it to zero after use (manufacturer-stated).

Stahlwille states a deviation of indication of ±3% (size a/2: ±4%) and a calibration certificate in accordance with DIN EN ISO 6789-2:2017 (manufacturer-stated). Insert tools are ordered separately.

Where this product is used

• Fasteners with a torque specified in inch-pounds or foot-pounds
• Maintenance of equipment built to inch-pound torque specifications
• Work where one wrench must take a range of insert tools

Features

• Twin in·lb and ft·lb scale with a ring scale for fine setting (manufacturer-stated)
• QuickSelect rapid setting: pull, set, lock, all using the one setting knob (manufacturer-stated)
• Noticeable double signal when the preset torque is reached (manufacturer-stated)
• No need to reset to zero: the measuring element is only under load while force is applied (manufacturer-stated)
• Square drive with QuickRelease safety lock for 9 x 12 mm and 14 x 18 mm insert tools (manufacturer-stated)
• Handle resistant to oils, grease, fuels, brake fluids and Skydrol (manufacturer-stated)

Common specifications

Key specifications

Figures are Stahlwille's (manufacturer-stated).

Selecting the right option

Choose the size so your inch-pound specification sits inside the range, and match the holder to your insert tools: a/2, a/5 and a/10 take 9 x 12 mm tools, a/20 and a/40 take 14 x 18 mm tools. If your specifications are in N·m, see the Stahlwille 730N clicking torque wrenches, 4 to 650 N·m. For the smallest inch-pound size in a quick-adjust format see the Stahlwille 730a Quick a/2 inch-pound torque wrench, 30 to 175 in·lb.

Related products

Related Stahlwille torque tools: Stahlwille 730N clicking torque wrenches, 4 to 650 N·m, Stahlwille 730a Quick a/2 inch-pound torque wrench, 30 to 175 in·lb, Stahlwille 730 Quick torque wrenches, 6 to 650 N·m and Stahlwille 730NR torque wrenches with fixed ratchet, 10 to 400 N·m.