Hobson MCS88GCM100130 M10 x 130mm Stud Chemical Anchor Kit, Hot Dip Galvanised

This page covers the Hobson stud chemical anchor kit (flat top and angle cut point, hot dip galvanised finish and class 8.8 designation). It lists 5 items: M10 to M24 in 130 to 300mm lengths.

A chemical anchor stud is a threaded stud that is fixed into a drilled hole with a chemical (resin) anchoring system.

The supplier names these items "Class 8.8". No strength figures are published here, because the supplier description does not give any (manufacturer-stated).

The supplier description does not say whether resin or capsules are included, so this page does not claim that they are.

Pack quantity varies by item, from 5 to 10 per pack, and is shown in the table.

Where this product is used

• Fixing a threaded stud into a drilled hole with a chemical anchoring system
• Where a stud with a threaded end for a nut is wanted
• Choosing the size, length and pack quantity from the table to suit the job

Features

• 5 items: M10 to M24 in 130 to 300mm lengths
• Flat top and angle cut point, hot dip galvanised finish and class 8.8 designation
• Class 8.8 as named by the supplier (manufacturer-stated)
• Pack quantities from 5 to 10, shown for each item

Common specifications

Key specifications

Selecting the right option

Choose the stud size and length to suit the fixture and the hole depth the job needs. This page gives no load ratings, base material suitability or hole sizes, because the supplier description does not state them. Check the manufacturer's installation data for the item before you specify it.

Related products

Related anchors: Hobson Stud Chemical Anchor Kit, Class 5.8, Chisel Point, Hot Dip Galvanised, M8 x 110mm, Box of 10, Hobson Metric Galvanised Flat Cut Stud Chemical Anchor, M10 to M24 and Hobson Metric Stud Chemical Anchor Kit, Grade 5.8, Hot Dip Galvanised, M10 to M24.