Sutton A110HL045 Stack-In Tool Lanyard for Height Safety, 4.5 kg Capacity

The Sutton A110HL045 (A110 H L045) Stack-In tool lanyard tethers tools to a work belt for height safety, with a 4.5 kg capacity. It is compatible with Stack-In and Stack Pack cases.

A looped end feeds through the tool mounting point and a carabiner end secures it, with a sliding lock that adjusts the length. The carabiner has a locking mechanism for the anchor point. Do not use the lanyard on items heavier than the rated capacity of 4.5 kg.

Where this product is used

• Tethering hand tools to a work belt when working at height, so a dropped tool stays attached.
• Use with Stack-In and Stack Pack cases.
• Trade and maintenance work where tools are used above ground level.

Design features

• Maximum capacity 4.5 kg.
• Looped end feeds through the tool mounting point.
• Carabiner end with a locking mechanism for the anchor point.
• Sliding lock adjusts the lanyard: depress the button and move as required.
• Compatible for use with Stack-In and Stack Pack cases.

Fitting the lanyard

• Tool mounting: feed the looped end through the tool mounting point. Once the loop has been fed through the tool, feed the carabiner end through and tighten. If necessary, adjust the sliding lock by depressing the button and moving as required.
• Anchor point mounting: to open the carabiner, twist the locking mechanism and push upward. Once open, hook the carabiner over the anchoring point and then release to close.
• Make sure the carabiner lock has rotated into the locked position.
• Do not use this safety lanyard on items heavier than the rated capacity (4.5 kg).

Key specifications

Related products

More from the Stack-In range: the A100 Stack Tub. Stack-In bit sets: Phillips screwdriver bit set and S250 insert bit set.