Sutton 1mm D310 3xD Carbide Drill Bit - Metric - VHM TiCN
Available
The Sutton D310 is a 3 × Ø solid carbide drill with a TiCN coating. It has 15° right-hand helix flutes (R15), a 135° 4 facet Form C point and a plain cylindrical shank. This page covers the Sutton D310 Carbide Drill Bit - Metric - 3xD - R15 NH - VHM - TiCN, available in 27 diameter (mm) options: 1, 1.5, 1.6, 2, 2.5, 3, 3.3, 3.5 and 19 more.
Rigid twist drill with slow spiral 15 degree flutes; suitable for harder steel, tool steel and cast iron.
This is the metric range: 27 sizes from 1 to 12 mm, with flute lengths of 13 to 54 mm and overall lengths of 38 to 92 mm. Working to a different size system? The same drill is also listed as the imperial range.
Where this product is used
- Harder steel, tool steel and cast iron, the materials this rigid slow-spiral carbide drill is made for.
- Materials rated Optimal for this drill: non-alloy steels; low-alloy steels; high-alloy and tool steels; ferritic and martensitic stainless steels; precipitation-hardening stainless steel; grey cast iron; nodular cast iron; malleable cast iron; aluminium and magnesium cast alloys over 12% Si; and chilled and hardened cast iron.
- Also rated Effective: duplex stainless steel; wrought aluminium and magnesium alloys; cast aluminium and magnesium alloys (up to 12% Si); and thermosetting and fibre-reinforced plastics.
- Rated Optimal for some grades and Effective for others: copper alloys, brass and bronze; and hardened steel (45 to 62 HRC).
- Hole depths to 3 × Ø. Step feeding or pecking is required beyond 3 × Ø.
Finish
Titanium carbonitride (TiCN). TiCN has a microhardness of 3000 HV, and is used for abrasive materials such as cast iron and aluminium alloys, adhesive materials such as copper alloys, and difficult-to-machine materials.
Cutting speeds and feeds
Cutting speeds (Vc) and feed numbers for this drill are from the Sutton High Performance catalogue application guide. The table lists the material groups covered. Optimal ratings are shown in bold and Effective ratings in regular type. The rpm and feed columns show what the speed and feed number work out to at Ø6 mm and Ø10 mm (speed in rpm = Vc × 1000 ÷ (π × Ø)). Treat these as starting values and adjust for the machine, set-up and coolant.
| Material (VDI 3323 group) | Rating | Vc (m/min) | Feed no. | Ø6 mm: rpm / feed | Ø10 mm: rpm / feed |
|---|---|---|---|---|---|
| Non-alloy steel, about 0.45 %C, quenched and tempered (250 HB) | Optimal | 100 | 4 | 5,310 rpm / 0.1 mm/rev | 3,180 rpm / 0.16 mm/rev |
| Non-alloy steel, about 0.75 %C, annealed (270 HB) | Optimal | 100 | 4 | 5,310 rpm / 0.1 mm/rev | 3,180 rpm / 0.16 mm/rev |
| Non-alloy steel, about 0.75 %C, quenched and tempered (300 HB) | Optimal | 70 | 3 | 3,710 rpm / 0.08 mm/rev | 2,230 rpm / 0.12 mm/rev |
| Low-alloy steel, quenched and tempered (275 HB) | Optimal | 85 | 3 | 4,510 rpm / 0.08 mm/rev | 2,710 rpm / 0.12 mm/rev |
| Low-alloy steel, quenched and tempered (300 HB) | Optimal | 70 | 3 | 3,710 rpm / 0.08 mm/rev | 2,230 rpm / 0.12 mm/rev |
| Low-alloy steel, quenched and tempered (350 HB) | Optimal | 60 | 3 | 3,180 rpm / 0.08 mm/rev | 1,910 rpm / 0.12 mm/rev |
| High-alloy, cast and tool steel, annealed (200 HB) | Optimal | 70 | 3 | 3,710 rpm / 0.08 mm/rev | 2,230 rpm / 0.12 mm/rev |
| High-alloy, cast and tool steel, hardened and tempered (325 HB) | Optimal | 60 | 3 | 3,180 rpm / 0.08 mm/rev | 1,910 rpm / 0.12 mm/rev |
| Corrosion-resistant steel, ferritic / martensitic, annealed (200 HB) | Optimal | 60 | 3 | 3,180 rpm / 0.08 mm/rev | 1,910 rpm / 0.12 mm/rev |
| Corrosion-resistant steel, martensitic, quenched and tempered (240 HB) | Optimal | 60 | 3 | 3,180 rpm / 0.08 mm/rev | 1,910 rpm / 0.12 mm/rev |
| Duplex stainless steel (250 HB) | Effective | 30 | 3 | 1,590 rpm / 0.08 mm/rev | 955 rpm / 0.12 mm/rev |
| Precipitation-hardening stainless steel (250 HB) | Optimal | 30 | 3 | 1,590 rpm / 0.08 mm/rev | 955 rpm / 0.12 mm/rev |
| Grey cast iron, ferritic / pearlitic (180 HB) | Optimal | 100 | 3 | 5,310 rpm / 0.08 mm/rev | 3,180 rpm / 0.12 mm/rev |
| Grey cast iron, pearlitic (260 HB) | Optimal | 85 | 3 | 4,510 rpm / 0.08 mm/rev | 2,710 rpm / 0.12 mm/rev |
| Nodular cast iron, ferritic (160 HB) | Optimal | 85 | 3 | 4,510 rpm / 0.08 mm/rev | 2,710 rpm / 0.12 mm/rev |
| Nodular cast iron, pearlitic (250 HB) | Optimal | 85 | 3 | 4,510 rpm / 0.08 mm/rev | 2,710 rpm / 0.12 mm/rev |
| Malleable cast iron, ferritic (130 HB) | Optimal | 85 | 3 | 4,510 rpm / 0.08 mm/rev | 2,710 rpm / 0.12 mm/rev |
| Malleable cast iron, pearlitic (230 HB) | Optimal | 85 | 3 | 4,510 rpm / 0.08 mm/rev | 2,710 rpm / 0.12 mm/rev |
| Wrought aluminium and magnesium alloy, non heat treatable (60 HB) | Effective | 140-200 | 4 | 7,430-10,610 rpm / 0.1 mm/rev | 4,460-6,370 rpm / 0.16 mm/rev |
| Wrought aluminium and magnesium alloy, heat treatable (100 HB) | Effective | 140-200 | 4 | 7,430-10,610 rpm / 0.1 mm/rev | 4,460-6,370 rpm / 0.16 mm/rev |
| Cast aluminium and magnesium alloy (up to 12% Si), non heat treatable (75 HB) | Effective | 140-200 | 4 | 7,430-10,610 rpm / 0.1 mm/rev | 4,460-6,370 rpm / 0.16 mm/rev |
| Cast aluminium and magnesium alloy (up to 12% Si), heat treatable (90 HB) | Effective | 140-200 | 4 | 7,430-10,610 rpm / 0.1 mm/rev | 4,460-6,370 rpm / 0.16 mm/rev |
| Aluminium and magnesium cast alloy over 12% Si (130 HB) | Optimal | 140-200 | 4 | 7,430-10,610 rpm / 0.1 mm/rev | 4,460-6,370 rpm / 0.16 mm/rev |
| Copper alloys, free cutting, Pb over 1% (110 HB) | Effective | 140-200 | 4 | 7,430-10,610 rpm / 0.1 mm/rev | 4,460-6,370 rpm / 0.16 mm/rev |
| Brass (CuZn, CuSnZn) (90 HB) | Optimal | 140-200 | 4 | 7,430-10,610 rpm / 0.1 mm/rev | 4,460-6,370 rpm / 0.16 mm/rev |
| Bronze (CuSn) (100 HB) | Effective | 140-200 | 4 | 7,430-10,610 rpm / 0.1 mm/rev | 4,460-6,370 rpm / 0.16 mm/rev |
| Thermosetting and fibre-reinforced plastics | Effective | 50-280 | 6 | 2,650-14,850 rpm / 0.16 mm/rev | 1,590-8,910 rpm / 0.24 mm/rev |
| Hardened steel, 45 HRC | Optimal | 60 | 2 | 3,180 rpm / 0.065 mm/rev | 1,910 rpm / 0.1 mm/rev |
| Hardened steel, 55 HRC | Effective | 40 | 2 | 2,120 rpm / 0.065 mm/rev | 1,270 rpm / 0.1 mm/rev |
| Chilled cast iron (400 HB) | Optimal | 85 | 3 | 4,510 rpm / 0.08 mm/rev | 2,710 rpm / 0.12 mm/rev |
Feed rates (mm/rev) for the feed numbers above:
| Ø (mm) | Feed no. 2 (mm/rev) | Feed no. 3 (mm/rev) | Feed no. 4 (mm/rev) | Feed no. 6 (mm/rev) |
|---|---|---|---|---|
| 2 | 0.025 | 0.03 | 0.04 | 0.06 |
| 3 | 0.035 | 0.045 | 0.055 | 0.09 |
| 4 | 0.045 | 0.06 | 0.075 | 0.12 |
| 5 | 0.055 | 0.07 | 0.09 | 0.14 |
| 6 | 0.065 | 0.08 | 0.1 | 0.16 |
| 8 | 0.085 | 0.1 | 0.13 | 0.2 |
| 10 | 0.1 | 0.12 | 0.16 | 0.24 |
| 12 | 0.12 | 0.15 | 0.18 | 0.28 |
| 16 | 0.15 | 0.19 | 0.23 | 0.36 |
| 20 | 0.18 | 0.23 | 0.28 | 0.42 |
| 25 | 0.22 | 0.27 | 0.33 | 0.5 |
Drilling notes
- Step feeding or pecking is required for drilling greater than 3 x Ø.
- When drilling a cast or black (not machined) surface, reduce the drilling speed by 20%.
- For optimal positional accuracy and hole size, the use of spot drills is recommended prior to drilling the desired hole; see Sutton's spotting drill range (D175).
- For hole depths greater than 7 x Ø, pre-drill a pilot hole first for more accurate hole position and to stop the drill wandering. The pilot can be drilled with a short, rigid drill about 3 x Ø deep at reduced feed.
Accuracy
The drill diameter (d1) tolerance is m7 and the shank tolerance is -0.025.
Key specifications
| Specification | Detail |
|---|---|
| Catalogue code | D310 |
| Range | 3xD Carbide Drill |
| Material | Solid carbide (VHM) |
| Finish | Titanium carbonitride (TiCN) |
| Flute geometry | 15° right-hand helix (R15) |
| Point | 135° 4 facet Form C |
| Shank | Plain cylindrical shank |
| Drill diameter tolerance (d1) | m7 |
| Shank tolerance | -0.025 |
| Designation | NH |
| Drilling depth | up to 3 × Ø |
| Sizes in this range | 27 sizes, 1-12mm |
Related drilling products
Compare other Sutton drills: D310 3xD carbide (imperial), D304 3xD carbide, D323 3xD carbide and D326 5xD carbide. Browse all Carbide Drill Bits. Need help choosing? Our guide to choosing the right drill bit and drill bit selection guide cover drill types and materials, and the speeds and feeds chart and cutting tool troubleshooting guide cover speeds and common problems.
Resources
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
Sutton D310 Carbide Drill Bit - Metric - 3xD - R15 NH - VHM - TiCN: 1
SKU: A0007132 | Model: D3100100
This is the 1mm diameter option of the Sutton D310 Carbide Drill Bit - Metric - 3xD - R15 NH - VHM - TiCN. Key details for this option: flute length 13mm, overall length 38mm.
Description
The Sutton D310 is a 3 × Ø solid carbide drill with a TiCN coating. It has 15° right-hand helix flutes (R15), a 135° 4 facet Form C point and a plain cylindrical shank.
Rigid twist drill with slow spiral 15 degree flutes; suitable for harder steel, tool steel and cast iron. This is the metric range: 27 sizes from 1 to 12 mm, with flute lengths of 13 to 54 mm and overall lengths of 38 to 92 mm.
