Skip to content

Turning Insert CNMG Insert Style - MR7 Grade TK1501 6.35mm (S): CNMG190612-MR7 TK1501

SKU: A0117005 | Model: 03064490

Seco Turning Insert C Shape Code 6.35 x 1.2 x 19.05mm G Insert Type - MR7 Grade TK1501 ± 0.13/± 0.05mm Tolerance CNMG190612-MR7,TK1501 10pcs

Turning Insert CNMG Insert Style - MR7 Grade TK1501 6.35mm Insert Thickness (S)

C shape code.

G insert type, with hole and chip breaker on both faces.

TK1501 insert grade.

6.35mm insert thickness (S).

TK1501 Insert Grade

Duratomic® grade.

A highly wear-resistant grade for cast irons in general as well as in steels.

The grade is particularly capable in the machining of ductile (nodular) cast irons also in more demanding setups and interrupted cuts.

Ti(C,N) + Al2O3 + Used Edge Detection (Chrome).

MR7 Chipbreaker Programme

The strongest chipbreaker for double-sided inserts.

The MR7 is suitable for high feed rates and depths of cut that normally require a single-sided insert.

The chipbreaker has a wide negative T land, which gives high edge strength.

Indicative machining range: f = 0,35–0,90 mm/rev, ap = 1,5–7,0 mm.

About Seco Turning Insert

Anything is possible when it comes to our broad selection of general turning grades and chip breakers.

Supporting inserts of different shapes, sizes, and thicknesses, we developed each of these solutions with the same goal in mind.

to boost the productivity and tool life in your turning applications.

Covering all material groups, this comprehensive range allows you to achieve your goals in terms of material removal rates, tool life, and surface finish.

Quote Cart