Skip to content

Turning Insert VNMU Insert Style - MF2 Grade TP1501: VNMU130404-MF2 TP1501

SKU: A0117437 | Model: 02972170

Seco Turning Insert V Shape Code 4.76 x 0.4 x 7.94mm U Insert Type - MF2 Grade TP1501 ± 0.13/± 0.05mm Tolerance VNMU130404-MF2,TP1501 10pcs

Turning Insert VNMU Insert Style - MF2 Grade TP1501

V shape code.

U insert type, negative insert with hole and chip-breaker on both faces for tool holders with pin lock only.

TP1501 insert grade.

TP1501 Insert Grade

Duratomic® grade.

Highly heat and wear-resistant grade extremely well suited for productive general turning of steels and a useful backup in other material groups.

Ti(C,N) + Al2O3 + Used Edge Detection (Chrome).

MF2 Chipbreaker Programme

First choice for finishing with negative inserts.

Suitable for chip control at depths of cut down to 0,25 mm, provided that the feed rate is in excess of 0,25 mm/rev.

Good capacity for medium rough machining.

Indicative machining range: f = 0,10–0,40 mm/rev, ap = 0,2–3,0 mm.

About Seco Turning Insert

Anything is possible when it comes to our broad selection of general turning grades and chip breakers.

Supporting inserts of different shapes, sizes, and thicknesses, we developed each of these solutions with the same goal in mind.

to boost the productivity and tool life in your turning applications.

Covering all material groups, this comprehensive range allows you to achieve your goals in terms of material removal rates, tool life, and surface finish.

Quote Cart