Seco WNMG060408-MF2 TH1000 Turning Insert
Available
Genuine Seco 80° trigon turning insert, Grade TH1000 with MF2 chipbreaker.
Key Specifications
| Grade | TH1000 |
|---|---|
| Insert Shape | 80° trigon (ISO shape code W) |
| Chipbreaker | MF2 |
| Insert Details | W shape code. G insert type, with hole and chip breaker on both faces. TH1000 insert grade. |
About Grade TH1000
A very hard super micro-grain grade intended for partly hardened steel components as well as generally workpiece materials such as superalloys and due to remarkable edge toughness it also provides high performance in interrupted cuts and hard-surface removal. Ti-Al-Si-N nanolaminate coating.
About the MF2 Chipbreaker
First choice for finishing with negative inserts. Suitable for chip control at depths of cut down to 0,25 mm, provided that the feed rate is in excess of 0,25 mm/rev. Good capacity for medium rough machining. Indicative machining range: f = 0,10–0,40 mm/rev, ap = 0,2–3,0 mm.
About Seco Turning Inserts
Anything is possible when it comes to our broad selection of general turning grades and chipbreakers. Supporting inserts of different shapes, sizes, and thicknesses, we developed each of these solutions with the same goal in mind: to boost the productivity and tool life in your turning applications. Covering all material groups, this comprehensive range allows you to achieve your goals in terms of material removal rates, tool life, and surface finish.
Resources
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
-
WNMG060408-MF2 TH1000
Model Number: 02938564
-
WNMG080408-MF2 TH1000
Model Number: 02730826
-
WNMG080412-MF2 TH1000
Model Number: 02730827
